Description
  • Single Workstation Continuous Monitor
    Continuously monitors the path-to-ground integrity of two operators and one conductive or dissipative worksurface; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
  • Digital Signal Processing Technology
    Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 megohm safety resistor
  • Operator Body Voltage Detection
    Alarms if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item
  • 0.40 Volt Operator Test Voltage
    Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
  • 500 Millisecond Alarm Response Time
    Identifies failures and intermittencies that inferior technologies miss
  • Operator Remote Disconnect Alarm
    Prevents tampering should one intentionally disconnect the operator remote from the monitor
  • Miniature Monitor Size (0.85 x 2.4 x 2.6 inches)
    Occupies minimal space and includes mounting tabs secure installations
  • Dedicated Monitor Ground Cord
    Allows the monitor to be bonded to a reliable ESD ground, AC equipment ground, or auxilary ground
  • Use with Dual-Wire Wrist Straps
    See SCS dual-wire wrist straps
  • Calibration Verification
    Use the SCS 770065 Verification Tester to check the test limits of 724 Plus Workstation Monitors without removing them from their workstations
  • NIST Calibrated with Certificate Included
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
  • 100-240VAC Power Adapter with Interchangeable Plugs
    Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe
  • Made in the United States of America

 

U.S. Patents 6,930,612; 9,983,251