| 2844 |
 |
Excelta Pliers - Medium Chain Nose - SS - 2844
Medium-chain nose plier that has an overall length is 5.75”. This tool is used for pulling and pushing stent wires through the body and stent. |
Applications: General purpose applications
Size (Tip Width x Tip Height): .035'' (.875mm) x .04'' (1mm)
Body Width x Body Height: 0.37'' (9.25mm) x 0.26'' (6.5mm)
OAL: 5.75'' (143.75mm)
Weight: 4 Oz |
 |
| 11DI |
 |
Excelta Pliers - Medium Chain Nose - SS - 11DI
The 11DI three star medium chain nose plier has serrated jaws for firm gripping. The overall length is 4.8". It is made of stainless steel and features soft cushioned ESD safe ergonomic grips with dual leaf springs for smooth action. |
Applications: General purpose applications
Size (Tip Width x Tip Height): 0.43'' (10.75mm) x .256'' (6.4mm)
Tip Angle: Straight
OAL: 4.8'' (120 mm)
Weight: 3.5 Oz |
 |
| 7371E |
 |
Excelta Cutters Long Nose Fine Tip - Relieved Head - Carbon Steel-7371E
Medium-chain nose plier that has an overall length is 5.75”. This tool is used for pulling and pushing stent wires through the body and stent. |
Applications: General purpose applications
Body Width x Body Height: 0.32'' (8mm) x 0.20'' (5mm)
Tip Angle: 16°
OAL: 4.25'' (106.25mm)
Weight: 3 Oz |
 |
| 9231E |
 |
Excelta Cutters Small Oval Head Carbon Steel-9231E
Miniature relieved fine tip cutters made for cutting PTFE and some .001 stainless steel material under magnification. |
Applications: High precision cutting where accessibility is critical
Body Width x Body Height: 0.32'' (8mm) x 0.20'' (5mm)
Tip Angle: 14.25°
OAL: 4.25'' (106.25mm)
Weight: 3 Oz |
|
| 7241E |
 |
Excelta Cutters Medium Oval Head Carbon Steel -7241E
Great standard handle tool for cutting stainless steel wire but the tool will not last long. This tool can cut paper clips. |
Applications: Designed for cutting .045" soft wire leaving a small 'pinch' on the wire
Size (Tip Width x Tip Height): .050" (1.25mm) x .04" (1mm)
Body Width x Body Height: 0.42" (10.5mm) x .25" (6.25mm)
Tip Angle: 14.25°
OAL: 4.5" (112.5mm)
Weight: 3 Oz |
|
| 7140E |
 |
Excelta Cutters Medium Oval Head - Carbon Steel -7140E
Great long handle tool for cutting stainless steel wire but the tool will not last long. This tool can cut paper clips. |
Applications: Designed for maximum tool life, cutting up to .050'' diameter soft wire
Size (Tip Width x Tip Height): .050" (1.25mm) x .04" (1mm)
Body Width x Body Height: 0.42" (10.5mm) x .25" (6.25mm)
Tip Angle: 14.25°
OAL: 5.75" (143.75mm)
Weight: 3 Oz |
|
| 9247E |
 |
Excelta Cutters Medium Taper Relieved Head Carbon Steel -9247E
Great for cutting PTFE and silicon flash. Stainless steel construction with a pointed tip for hard-toreach applications. |
Applications: Designed for cutting .032'' soft wire leaving a small ‘pinch’ on the wire
Size (Tip Width x Tip Height): 0.42'' (10.5mm) x .25''
Body Width x Body Height: 0.42" (10.5mm) x .25" (6.25mm)
Tip Angle: 14.25°
OAL: 4.5" (112.5mm)
Weight: 3 Oz |
 |
| C7245X |
 |
Excelta Cutters Medium Taper Head Garbide Inserts -C7245X
Hardwire cutter designed to cut Nitinol and Stainless Steel material up to .010". |
Applications: Designed to cut small hard wire cleanly
Size (Tip Width x Tip Height): 0.38'' (9.50mm)
Body Width x Body Height: 0.42" (10.5mm) x .25" (6.25mm)
Tip Angle: 14.25°
OAL: 4.5" (112.5mm)
Weight: 3 Oz |
|
| C7245X-AV |
|
Excelta Cutters - C7245X-AV
Same as C7245X but with a longer handle and a foam grip. Cuts from one side only. Ideal for cutting flat stainless steel wire. |
Applications: Designed to cut small hard wire cleanly
Size (Tip Width x Tip Height): 0.38'' (9.50mm)
Body Width x Body Height: 0.42" (10.5mm) x .25" (6.25mm)
Tip Angle: 14.25°
OAL: 5.75" (143.75mm)
Weight: 1.68 Oz |
|
