Description

HRC 2 control

The compact refrigerated and heating circulator HRC 2 control is renowned for its high energy efficiency, a working temperature range from -30°C to 100°C and a powerful and infinitely variable pressure and suction pump. The on-demand and speed-controlled compressor reduces noise and operating costs.
The HRC 2 control in combination with an external temperature sensor is perfectly suitable to precisely temper external closed or open applications.
The high-quality Isolation of the 4 l bath allows fast heating and reduces heat input when cooling. Using the external temperature control circuit is possible for up to 2,5 l thermofluid without a refill.
The integrated hopper and drain valve ensure a safe and clean handling of the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unit’s air filter.There is a drain valve on the front side of the bath. A hose can be connected to empty the bath, so the user does not get in direct contact with the thermofluid.
  • Speed-controlled refrigeration system unit with 400 W cooling capacity
  • Speed-controlled PEEK pump (0,5 bar; 22 l/min)
  • 1500 W heating capacity (1200 W @115V)
  • digital level indicator
  • Safety classification III (FL) according to DIN 12876
  • Adjustable temperature safety circuit

With the Wireless Controller (Wico) the HRC 2 control can be operated safely and conveniently everywhere. Processes can be automated and simplified through 10 freely programmable temperature ramps with each 10 steps.

Additional features of the control device:
  • Operating Mode D (Confirmation Mode)
  • Signal if Set Point is reached
  • Timer/Counter
  • outgassing function for Labreactors

Interfaces:
  • Connection socket for external PT 100 temperature sensor (Accessory: PT100.30; Lemo connector)
  • Connection of magnetic valves possible (Mulit IO)
  • Alarm contact (Multi IO)
  • Connector for Standby contact input (Multi IO)
  • RS 232
  • USB

Technical Data

Appliance type Circulation thermostat
Class designation acc. DIN 12876 III
Identification according to DIN 12876 FL
Cooling agent R134a
Cooling agent quantity 230 g
Cooling agent pressure max. 20 bar
Heat output 1200 W
Cooling capacity (@20°C) 400 W
Cooling capacity (@10°C) 370 W
Cooling capacity (@0°C) 320 W
Cooling capacity (@-10°C) 240 W
Cooling capacity (@-20°C) 130 W
Working temperature -30 - 100 °C
Operating temperature min. -30 °C
Temperature display yes
Temperature stability DIN 12876 (@+70°C) ±0.05 K
Temperature stability DIN 12876 (@-10°C) ±0.05 K
Temperature control PID
Working temperature sensor PT 100
Safety temperature sensor PT1000
Working temperature display LED
Safety temperature display LED
Temperature stability DIN 12876 ±0.05 K
Connection for ext. temperature sensor PT 100
Display resolution 0.01 K
Display for operation with ext. sensor yes
Set temperature resolution ±0.1 K
Warning function optical yes
Warning function acoustic yes
Warning function excess temperature yes
Warning function insufficient temperature yes
Adjustable safety circuit 0 - 110 °C
Sub-level protection yes
Over-level protection yes
Filling volume 1.4 - 4.0 l
Pump type Pressure- / suction pump
Pump capacity adjustable yes
Pump pressure max. (0 liters discharge flow) 0.5 bar
Pressure pump (suction side) (0 liter flow) 0.25 bar
Flow rate max. (0 bar back pressure) 21 l/min
Pump connection M16x1
Calibration option yes
Technical data complies with the standard DIN 12876
Permissible ON time 100 %
Multi-Interface yes
Alarm output (potential-free contact) max. 30 V AC/DC
Alarm output (potential-free contact) max. 1 A
Solenoid valve output 24 VDC
Solenoid valve output max. 0.8 A
Standby input 5 VDC
Noise level 52 dB(A)
Dimensions (W x H x D) 220 x 475 x 525 mm
Weight 33.3 kg
Permissible ambient temperature 5 - 32 °C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 21
RS 232 interface yes
USB interface yes
Analog output yes
Voltage 115 V
Frequency 50/60 Hz
Power input 1500 W