HBC 5 basic

The HBC 5 basic is a heated bath circulator which heats up to a maximum temperature of 250 °C. It has a high quality stainless steel bath with a volume of 5 – 7 liters. The large surface of the radiator allows for an optimal heat exchange and a gentle heating process of the medium. The superior insulation leads to remarkably fast heat up times. The easy to clean bath has a front drain valve for safe emptying. In order to drain the bath, a hose is connected so there is no direct contact with the tempering fluid. With customer safety as our highest priority, the HBC 5 basic conforms to the highest safety classification III (FL) for use with flammable liquids according to DIN 12876.

• Temperature range: 20 – 250 °C
• Temperature accuracy: ± 0.02 K
• Integrated cooling coil
• Adjustable safety circuit
• Powerful, speed-controlled pressure/suction pump
• Push and turn buttons for an intuitive menu navigation
• Large easy to read LED display for pump speed and temperature
• Visual and acoustic safety warnings
• USB / RS 232 interface for PC control and documentation using labworldsoft®, as well as updating the device software through our website

Scope of delivery

• HBC 5 basic
• Hose olive NW 12 (2 pcs.)
• CC1
• Screwdriver (use for safety circuit)
• USB Cable - USB A to Micro-B, 2 m

Technical Data

Appliance type	Circulation thermostat
Class designation acc. DIN 12876	III
Identification according to DIN 12876	FL
Heat output	1250 W
Working temperature	room temp. +10K @1000rpm - 250 °C
Operating temperature min. (with external cooling)	-20 °C
Temperature display	yes
Temperature control	PID
Working temperature sensor	PT 100
Safety temperature sensor	PT1000
Working temperature display	LED
Safety temperature display	LED
Temperature stability DIN 12876	±0.02 K
Connection for ext. temperature sensor	PT 100
Display resolution	0.1 K
Display for operation with ext. sensor	yes
Set temperature resolution	±0.1 K
Warning function optical	yes
Warning function acoustic	yes
Warning function excess temperature	yes
Adjustable safety circuit	0 - 260 °C
Sub-level protection	yes
Over-level protection	yes
Filling volume	5 - 7 l
Pump type	Pressure- / suction pump
Pump capacity adjustable	yes
Pump pressure max. (0 liters discharge flow)	0.61 bar
Pressure pump (suction side) (0 liter flow)	0.45 bar
Flow rate max. (0 bar back pressure)	31 l/min
Pump connection	M16x1
Cooling coil connection	NW 8
Bath depth min.	150 mm
Width bath opening	172 mm
Depth bath opening	82 mm
Calibration option	yes
Technical data complies with the standard	DIN 12876
Permissible ON time	100 %
Dimensions (W x H x D)	275 x 406 x 500 mm
Weight	17 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 21
RS 232 interface	yes
USB interface	yes
Voltage	100 - 115 V
Frequency	50/60 Hz
Power input	1400 W