Monitor the buildup of electrostatic discharge in your laboratory space with Lab Pro's ESD workstation monitors. Our monitors are NIST-calibrated and certified. We also have workstation accessories you might need such as replacement jacks, nylon plugs, power relays, adapters, among others.
For urgent inquiries and bulk orders, call 888-4-LABPRO (888-452-2776). We offer next-day service in California and same-day service for will-calls.
The ANSI ESD S20.20 standard helps us plan a good program and the grounding system is the most important part in the Control of Electrostatic Discharges. Our monitoring system ensures...
Dual Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 Digital...
Workstation Diagnostic KitFully equipped with the hardware and software that allows you to monitor the path-to-ground integrity of two operators and ESD worksurfaces. The kit reports real-time data for the...
Use to perform periodic calibration testing of the following items: CTC061 WS Aware Monitor CTC062 WS Aware Monitor CTC065 Ground Master Monitor CTC331 Iron Man® Plus Monitor CTC334 Ground Man...
Calibration VerificationChecks the test limits of the SCS 770724 724 Plus Workstation Monitor without removing it from its workstation NIST Calibrated with Certificate IncludedCalibrated with accepted procedures and standards traceable to...
Operator Remote Splitter for the 770724 724 Plus Workstation Monitor Adds the ability to monitor a second operator at a nearby independent workstation Use with Dual-Wire Wrist Straps See SCS dual-wire...
Replacement Dual Operator Remote for the 770724 724 Plus Workstation Monitor Includes operator remote cable and mounting hardware Use with Dual-Wire Wrist Straps See SCS dual-wire wrist straps Made in the...
Single Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of two operators and one conductive or dissipative worksurface; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 Digital Signal Processing Technology...
Calibration Verification Checks the test limits of the SCS 770075 WSMONITOR2 Plus Workstation Monitor without removing it from its workstation NIST Calibrated with Certificate Included Calibrated with accepted procedures and standards...
Relay Controlled Power Strip with 4 Outlets (2 Normally Off, 1 Normally On, 1 Always On)Controls power to workbenches, hand tools, and other electronic devices dependent on the WS Aware...
Single Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of an operator and conductive or dissipative worksurface and meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 Electrical Overstress (EOS) Detection...
Dual Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 Digital...
Replacement operator jack for the following items:
CTC331-WW Iron Man Plus® Monitor
CTC334-WW Ground Man Plus Monitor
Easily connects to the monitor without the use of solder
Operator remote terminal for the CTC061 and CTC062 WS Aware Monitor Big Brother Sensor detects the presence of an operator and alarms if a wrist strap is not connected to...
Operator remote terminal for the CTC061 and CTC062 WS Aware Monitor Includes 1 visitor jack and 1 monitored operator jack Mounting tabs included for installation underneath table tops U.S....
NEW SCS 770069 Power Relay CompatibilityControls power to workbenches, hand tools, and other electronic devices dependent on the WS Aware Monitor’s status Dual Workstation Continuous MonitorContinuously monitors the path-to-ground integrity of...
Calibration Verification Checks the operator test limits of the SCS 724 Workstation Monitor and the test limits of the 725 Portable Wrist Strap Monitor without removing them from their workstations NEW...
100-240VAC power adapter with interchangeable plugsWorks with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe Compatible with the following products: 770060 Ground Master Monitor 770061 WS Aware Monitor...
NEW Ethernet ConnectivityProvides network communication with Static Management Program (SMP). Data collected through SMP includes operator resistance, operator voltage, mat resistance, metal tool impedance and metal tool EMI voltage. NEW...
NEW Ethernet ConnectivityProvides network communication with Static Management Program (SMP). Data collected through SMP includes operator resistance, operator voltage, mat resistance, metal tool impedance and metal tool EMI voltage. NEW...
Operator remote splitter kit for 724 Workstation Monitor Adds the ability to monitor a second operator at a nearby independent workstation Easy-to-install housing; mounting hardware included Mounts easily to most...
Replacement dual operator remote for 724 Workstation Monitor Compatible with dual-wire wrist straps
Easy-to-install housing; mounting hardware included Mounts easily to most machinery and work areas
The Verification Kit 725VK is designed to check the wrist strap input resistance ranges of the Workstation and Wrist Strap Monitors 700 Series. Includes four 1% resistor plugs and case....
Continuously monitors 1 operator dual-wire wrist strap and 1 ground connectionVisual and audible alarms indicate proper grounding of the operator and ground point Compact size and 9 volt battery power...
100-240VAC power adapter with interchangeable Europe and UK plugs Works with standard electrical systems in Europe, United Kingdom and Asia Compatible with the following items: 724 Workstation Monitor 724MO Workstation Monitor 740 Wrist Strap...
120VAC power adapter with North American plug Works with standard electrical systems in North America and Japan Compatible with SCS 724 Workstation Monitor and 790 Static Monitor 724 Workstation Monitor 724MO Workstation...
Single workstation continuous monitorMeets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 Continuously monitors 2 operator dual-wire wrist straps and 1 worksurface mat Visible and audible alarms indicate improper grounding of...
Parking stationProvides a storage terminal for the dual-wire wrist cord when the workstation is unoccupied Metal mounting bracketMounts to most surfaces conveniently located near the operator Increases life span of...
Interconnect cord for two worksurface mats Daisy-chains two worksurface mats for the monitoring of two workstations with the 724 Workstation Monitor Low profile Reduces inadvertent snagging that may disconnect the...
Connects workstation monitors to worksurface mats Tinned wire terminal connects to the workstation monitor 10mm stud terminal connects to the worksurface mat Embedded diode protects the workstation monitor should any...