Monitor the buildup of electrostatic discharge in your laboratory space with Lab Pro's ESD workstation monitors. Our monitors are NIST-calibrated and certified. We also have workstation accessories you might need such as replacement jacks, nylon plugs, power relays, adapters, among others.
For urgent inquiries and bulk orders, call 888-4-LABPRO (888-452-2776). We offer next-day service in California and same-day service for will-calls.
The ANSI ESD S20.20 standard helps us plan a good program and the grounding system is the most important part in the Control of Electrostatic Discharges. Our monitoring system ensures...
Dual Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 Digital...
Workstation Diagnostic KitFully equipped with the hardware and software that allows you to monitor the path-to-ground integrity of two operators and ESD worksurfaces. The kit reports real-time data for the...
Use to perform periodic calibration testing of the following items: CTC061 WS Aware Monitor CTC062 WS Aware Monitor CTC065 Ground Master Monitor CTC331 Iron Man® Plus Monitor CTC334 Ground Man...
Calibration VerificationChecks the test limits of the SCS 770724 724 Plus Workstation Monitor without removing it from its workstation NIST Calibrated with Certificate IncludedCalibrated with accepted procedures and standards traceable to...
Operator Remote Splitter for the 770724 724 Plus Workstation Monitor Adds the ability to monitor a second operator at a nearby independent workstation Use with Dual-Wire Wrist Straps See SCS dual-wire...
Replacement Dual Operator Remote for the 770724 724 Plus Workstation Monitor Includes operator remote cable and mounting hardware Use with Dual-Wire Wrist Straps See SCS dual-wire wrist straps Made in the...
Single Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of two operators and one conductive or dissipative worksurface; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 Digital Signal Processing Technology...
Calibration Verification Checks the test limits of the SCS 770075 WSMONITOR2 Plus Workstation Monitor without removing it from its workstation NIST Calibrated with Certificate Included Calibrated with accepted procedures and standards...
Relay Controlled Power Strip with 4 Outlets (2 Normally Off, 1 Normally On, 1 Always On)Controls power to workbenches, hand tools, and other electronic devices dependent on the WS Aware...
Single Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of an operator and conductive or dissipative worksurface and meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 Electrical Overstress (EOS) Detection...
Dual Workstation Continuous Monitor Continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 Digital...
Replacement operator jack for the following items:
CTC331-WW Iron Man Plus® Monitor
CTC334-WW Ground Man Plus Monitor
Easily connects to the monitor without the use of solder
Operator remote terminal for the CTC061 and CTC062 WS Aware Monitor Big Brother Sensor detects the presence of an operator and alarms if a wrist strap is not connected to...