SCS 724 Plus Workstation Monitor

SCS 724 Plus Workstation Monitor - 770724

$278.34

Single Workstation Continuous Monitor
Continuously monitors the path-to-ground integrity of two operators and one conductive or dissipative worksurface; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
Digital Signal Processing Technology
Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 megohm safety resistor
Operator Body Voltage Detection
Alarms if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item
0.40 Volt Operator Test Voltage
Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
500 Millisecond Alarm Response Time
Identifies failures and intermittencies that inferior technologies miss
Operator Remote Disconnect Alarm
Prevents tampering should one intentionally disconnect the operator remote from the monitor
Miniature Monitor Size (0.85 x 2.4 x 2.6 inches)
Occupies minimal space and includes mounting tabs secure installations
Dedicated Monitor Ground Cord
Allows the monitor to be bonded to a reliable ESD ground, AC equipment ground, or auxilary ground
Use with Dual-Wire Wrist Straps
See SCS dual-wire wrist straps
Calibration Verification
Use the SCS 770065 Verification Tester to check the test limits of 724 Plus Workstation Monitors without removing them from their workstations
NIST Calibrated with Certificate Included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
100-240VAC Power Adapter with Interchangeable Plugs
Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe
Made in the United States of America