Soldering Station - FX951-66Superior heat transfer and thermal recovery, Lockout key card, Low temperature alarm, Auto shut-off, Sleep mode functionalitySpecs:Power consumption 75W, 120V, Temperature range 200° - 450°C (400° -...
Thermal Wire Stripper - FT802-03Upgraded design from the FT-8002. Improved blade alignment with set screws to ensure alignment. Integrated handpiece holder to maximize workbench space and provides a shield to...
CHP PN-20-M Thin, Short Nose Pliers - PN-20-MThin, short pliers for very delicate workSpecs:12mm long jaw with 1mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP-170, Micro Cutter - CHP-170Tool for a flush cut with very sharp cutting edges. One of the most popular cutting tool. Dolphin-style grips are slim and lightweight to reduce stress...
Replacement Desoldering Nozzle This nozzle is used with the following Hakko Desoldering Tools and Handpieces: Hakko 808 Desoldering Tool Hakko 817 Desoldering Gun Hakko 802 Desoldering Gun Hakko 807 Desoldering...
Soldering Iron - FX650-02/PUses a highly efficient ceramic heater, Comes with a basic iron stand and small sample of lead-free solderSpecs:Power consumption 15W, Input voltage 120VAC 50/60 Hz, Temperature stability...
Soldering Iron - FX600-05/PAdjustable temperature control, Portable & lightweightSpecs:Input voltage 120VAC 60Hz, 74W, tip-to-ground resitance < 2 ?, Leak voltage < 2 mV, Temperature range 200?500°C (400?932°F), Temperature accuracy ±10°C...
Dual Port Soldering Station - FX889-04/PTwo independent ports, Digital calibration, Low temperature alarm, Ajustable temperature control, Password protected temperature setting functionality, Preset mode allows storage of up to (5) preset...
Digital Soldering Station - FX888D-23BYDigital calibration, Low temperature alarm, Ajustable temperature control, Password protected temperature setting functionality, Preset mode allows storage of up to (5) preset temperatures, Wide selection of...
Dual Port Soldering System with Heavy Duty Handpiece - FM203-HDDual soldering ports, Low temperature alarm, Auto power shut-off, Lock out card, No calibration required, Meets or exceeds J-STD-001, One tip...
Dual Port Soldering System with Two Soldering Handpieces - FM203-DPDual soldering ports, Low temperature alarm, Auto power shut-off, Lock out card, No calibration required, Meets or exceeds J-STD-001, One tip...
Dual Port Soldering System with One Soldering Handpiece - FM203-01Dual soldering ports, Low temperature alarm, Auto power shut-off, Lock out card, No calibration required, Meets or exceeds J-STD-001, One tip...
3-Port Rework Station - FM206-STAAuto shut-off with sleep function, passcode protected, desoldering delay timer, optional footswitch for pump operation, option for external gas supply for hot air, manual or automatic...
3-Port Rework Station - FM206-DSAAuto shut-off with sleep function, passcode protected, desoldering delay timer, optional footswitch for pump operation, option for external gas supply for hot air, manual or automatic...
3-Port Rework Station - FM206-DSSAuto shut-off with sleep function, passcode protected, desoldering delay timer, optional footswitch for pump operation, option for external gas supply for hot air, manual or automatic...
3-Port Rework Station - FM206-DTSAuto shut-off with sleep function, passcode protected, desoldering delay timer, optional footswitch for pump operation, option for external gas supply for hot air, manual or automatic...
Induction Heating Soldering System - FX100-04Boost control delivers a boost of extra power, sleep function reduces tip temperature and preserves tip life, "plug-n-go" soldering, no calibration required, auto-power off safety...
SMD Rework Station - 851-2Ajustable temperature control from 100°C to 540°C (212°F to 1004°F), Ultra-light setting for air volume control, ESD safeSpecs:Total power consumption 85W, (station 5W, iron 80W), Diaphragm...
Preheater - FR830-02Compact design, fast heating, excellent thermal stability, optional hand or foot switch, ESD safeSpecs:Voltage 120VAC, Power consumption 470W , Hot air temperature 150°C - 300°C (302°F - 572°F),...
Large IR Preheater - FR872-034-Bank (independent switchable heat zones), low profile, bench-top designed to elevate the temperature of pcb assemblies. Useful on medium to high-mass boards, high efficiency carbon filament...
SMD Hot Air Rework Station - FR810B-05Easy-to-read digital display, slender handpiece with integrated start/stop button, 5 User programmable presets, Auto power-off, Password lockoutSpecs:Input voltage 120VAC 60Hz, Power consumption 820W, Heater...
Advanced SMD Hot Air Rework System - FR811-04The FR-811 has dual thermocouple inputs for part and board monitoring, PC integration via USB port with Hakko software and an additonal external...
Blades for FT801-02 - G2-A1603These long, 26-36 AWG blades feature a wishbone support to mitigate rotational play in the blades.Specs:26-36awgWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
Blades for FT801-02 - G2-A1602These long, 18-24 AWG blades feature a wishbone support to mitigate rotational play in the blades.Specs:18-24awgWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
Blades for FT801-02 - G2-A1601These long, straight blades feature a wishbone support to mitigate rotational play in the blades.Specs:StraightWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
Blades for FT801-02 - G2-1601Long straight pair of wire stripper blades, for use with the FT-801.Specs:4.7mm/45° x 17mmWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
Blades for FT801-02 - G3-1602This knife blade is compatible with the Hakko FT-801 and FT-802 Thermal Wire StrippersSpecs:45° x 17mmWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
Blades for FT801-02 - G3-1601This knife blade is compatible with the Hakko FT-801 and FT-802 Thermal Wire StrippersSpecs:R15° X 16mmWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
Blades for FT801-02/802-03 - G4-1603G4 blades boast an optimized edge for wire stripping with superior thermal performance that make wire stripping easierSpecs:26-38awgWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
Blades for FT801-02/802-03 - G4-1602G4 blades boast an optimized edge for wire stripping with superior thermal performance that make wire stripping easierSpecs:18-28awgWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
Blades for FT801-02/802-03 - G4-1601G4 blades boast an optimized edge for wire stripping with superior thermal performance that make wire stripping easierSpecs:StraightWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
Hot Knife Handpiece Only - FT8003-02Connector assembly handpiece only for the FT-8003. Knife blade design for ultra-thick wires, expando, or other wire harness braid. Ultra-slim ergonomic handpiece with easy insertion...
Thermal Wire Stripper Handpiece Only - FT8004-81FT8004-81 handpiece for the FT-802. Handpiece only.Specs:N/AWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
Conversion Kit for Thermal Wire Stripper - FT8004-82The FT-8004 handpiece is backwards compatible with the FT-801 station. This conversion kit allows current users of the FT-801 to upgrade to the...
Conversion Kit for Hot Knife - FT8003-81The Hakko FT-8003 hot knife blade is designed for stripping ultra-thick wires and wire harness braid. Conversion kit includes hot knife with G3-1601 blade...
FT-802 with Hot Knife - FT802-53The FT-802 Thermal Wire Stripper with Hot Knife comes with the FT-8003 hot knife handpiece and holder. This bundle allows users who prefer to use...
Mini Hot Tweezers - Handpiece Only - FM2023-02Hakko’s FM-2023 Mini Hot Tweezer tool is designed for use with small chip components, as small as 0201. This Tweezer tool has a...
Nitrogen Soldering System Kit - FM2026-KITThe Hakko FM-2026 N2 Soldering System Kit is ideal for all your lead-free hand soldering applications. The Hakko N2 soldering system is the ideal solution...
Micro Soldering Iron - Handpiece Only - FX1002-83The Hakko FX-1002 micro soldering iron is to be used with the FX-100 RF induction heating soldering station and is ideal for soldering under microscopes....
Soldering Conversion Kit w/o Holder - FM2027-01The FM-2027 soldering iron uses T15 series quick-change composite tips that provides superior heat transfer and heat recovery. Can be used on FM-206/205/204/203/202, FP-102...
Iron Connector Assembly - FM2026-01The Hakko FM-2026 soldering iron connector assembly is designed to supply hot nitrogen to the soldering area, which can increase the soldering efficiency as the gas...
RF Induction Heating Soldering Iron - FX1001-51Soldering handpiece conversion kit with iron holder is used with the Hakko FX-100 RF induction heating soldering system. It is also compatible with a select number...
Nitrogen Heavy Duty Soldering Iron Handpiece - FM2031-01The Hakko FM2031-01 Nitrogen compatible handpiece can be attached to the FM203 “D” port and the Hakko FM-206 CH2 or CH3 ports. Uses...
Micro Soldering Iron Conversion Kit - FX1002-84The Hakko FX-1002 micro soldering iron is for use with the FX-100 RF induction heating soldering station and is ideal for soldering under microscopes....
RF Induction Heating Soldering Iron Conversion Kit - FX1001-52Soldering handpiece conversion kit with iron holder is used with the Hakko FX-100 RF induction heating soldering system. It is also compatible with a...
Hot Air Pencil Kit - FM2029-01The HAKKO FM-2029 Single Hot Air Pencil can be used with the FM-206 3-Port Rework System.Specs:Power consumption 140W(24V), Temperature range 200-1030°F (100-550°C), Tip-to-ground resistance <2...
Desoldering Handpiece Kit - FM2024-42The configurable handpiece uses quick-change composite nozzles and allows you to choose either a gun or pencil style handpiece. The desoldering nozzle/tip heater cartridge assembly offers...
CHP PN-2002-M Needle Nose Pliers - PN-2002-MThin, short pliers for very delicate workSpecs:32mm long jaw with 1mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-5007 Long Nose Pliers - PN-5007Heavy-duty pliers. For the general handling of all types of componentsSpecs:25mm long jaw with 5mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-5006 Long Nose Pliers - PN-5006Heavy-duty pliers. For the general handling of all types of componentsSpecs:25mm long jaw with 2mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-5005 Long Nose Pliers - PN-5005Heavy-duty pliers. For the general handling of all types of componentsSpecs:25mm long jaw with 2mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-5004 Short Flat Nose Pliers - PN-5004Heavy-duty pliers. For the general handling of all types of componentsSpecs:19mm long jaw with 2mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-5002 Short Nose Pliers - PN-5002Heavy-duty pliers. For the general handling of all types of componentsSpecs:19mm long jaw with 2mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-5001 Short Nose Pliers - PN-5001Heavy-duty pliers. For the general handling of all types of componentsSpecs:19mm long jaw with 2mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-2008 Long Nose Pliers - PN-2008 For delicate work in tight areasSpecs:32mm long jaw with 3.0mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-2007 Long Nose Pliers - PN-2007 For delicate work in tight areasSpecs:32mm long jaw with 3.0mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-2006 Long Nose Pliers - PN-2006 For delicate work in tight areasSpecs:32mm long jaw with 1.2mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-2005 Long Nose Pliers - PN-2005 For delicate work in tight areasSpecs:32mm long jaw with 1.2mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-2004 Flat Nose Pliers - PN-2004Suitable for all types of componentsSpecs:20mm long jaw with 3.0mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-2002-D Pointed Nose Pliers - PN-2002Suitable for all types of componentsSpecs:20mm long jaw with 1.2mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP PN-2001 Pointed Nose Pliers - PN-2001Suitable for all types of componentsSpecs:20mm long jaw with 1.2mm noseWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP CSP-30-7 Wire Stripper - CSP-30-7Very strong multi-use tool. It can be used as: shears, multi-diameter wire stripper, pliersSpecs:N/AWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP CSP-30-2-D Wire Stripper - CSP-30-2Very strong multi-use tool. It can be used as: shears, multi-diameter wire stripper, pliersSpecs:N/AWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP CSP-30-1 D Multi Function Wire Stripper - CSP-30-1Very strong multi-use tool. It can be used as: shears, multi-diameter wire stripper, pliersSpecs:N/AWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP CS-30-X Shear/Plier Combo Tool - CS-30-XShears and pliers in the same tool; designed for use where both functions are requiredSpecs:Max Cut: 16 AWG copper wire, Shear Length: 25.5 mmWhat...
CHP CSP-30-3 Heavy-Duty Shear/Plier - CSP-30-3Straight, heavy-duty shears. An excellent tool for use on electric cablesSpecs:Straight blade, Shear length: 40mmWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP CS-30-XZ Three Function Tool - CS-30-XZSpecial multi purpose shears: Screwdriver, Soldering tip removal plier, cutter. Upper part of the blade can be used as a screwdriver for loosening the...
CHP CS-30 Shears - CS-30Extremely easy-to-handle long shears, specially designed for use in electronicsSpecs:Max Cut: 16 AWG copper wire, Shear length: 18.5mmWhat is In The Box:N/AAdd-Ons:N/AAccessories:N/A
CHP Mcro Nipper, TR-20-SM - TR-20-SMTool for flush cut with rounded outside edges to reduce nicking to adjacent components and leadsSpecs:Cutting Force: 3 kg, Max cut: 20 AWG copper wire,...
CHP TR-20-M-A - TR-20-M-ATool for a flush cut. The reduced head’s dimension and its pointed shape, allow access to difficult to reach areas.Specs:Cutting Force: 3 kg, Max cut: 20 AWG...
CHP Cutter, TR-25-50 - TR-25-50Tool for a flush cut, with inclined 50° blades for specific work in electronics applicationsSpecs:Cutting Force: 5 kg, Max cut: 16 AWG copper wire, Max cut...
CHP Micro Cutter, TR-20-50-M - TR-20-50-MParticularly thin nose tool for a flush cut with inclined 50° blades. Ideal to work in difficult to reach areas.Specs:Cutting Force: 2 kg, Max cut:...
CHP Micro Cutter, TR-20-M - TR-20-MThe small head and anatomic design makes this an ideal cutter for working in tight spaces.Specs:Cutting Force: 3 kg, Max cut: 20 AWG copper wire,...
CHP Macro Cutter, TRR-58-G - TRR-58-GThis tool is a very strong flush cut tool with a wide head and long handles. Aside from work in electronics, goldsmiths use this tool...
CHP TR-58-A - TR-58-AThe special treatment of blades make this tool suitable for the cutting of ferrous materialSpecs:Cutting Force: 11 kg, Max cut: 12 AWG copper wire, Max cut is...
CHP Medium Cutter, TR-58 - TR-58The special treatment of blades make this tool suitable for the cutting of ferrous materialSpecs:Cutting Force: 11 kg, Max cut: 12 AWG copper wire, Max...
CHP Medium Cutter, TR-30 - TR-30The tool exhibits longer life due to its thicker steel.Specs:Cutting Force: 5.5 kg, Max cut: 16 AWG copper wire, Max cut is determined with copper...
CHP-170-D, Micro Cutter - CHP-170-DTool for a flush cut with very sharp cutting edges. One of the most popular cutting tool. Dolphin-style grips are slim and lightweight to reduce stress...
CHP-170-A, Micro Cutter - CHP-170-ATool for a flush cut with very sharp cutting edges. Safety clip for holding wire scraps securely after cutting. Dolphin-style grips are slim and lightweight to...
Fume Extraction System w/Ducting - FA430-KIT23-Stage filtering system, for use at soldering stations, returns purified air to the area , extracts the contaminated air directly at the source, pre-filter removes...
Fume Extraction System w/Ducting - FA430-KIT13-Stage filtering system, for use at soldering stations, returns purified air to the area , extracts the contaminated air directly at the source, pre-filter removes...
Fume Extraction System w/o Ducting - FA430-163-Stage filtering system, for use at soldering stations, returns purified air to the area , extracts the contaminated air directly at the source, pre-filter...
Smoke Absorber - FA400-04Standard activated carbon filter absorbs up to 80 percent of the odors from the air, easy to replace, made of non-sloughing static dissipative conductive material, can be...
Ultra Heavy Duty Desoldering Station - FR400-53300W Heating element with a top controlled termperature of 940°F (500°C), Anti-clogging feature, Large solder collection chamber and easy to read displaySpecs:Input voltage of...
High Power Desoldering Station with Pencil-Style Tool - FR410-53Large, easy-to-read display, 3 User-programable presets, Password lockout, Vacuum system with.02 delay, Easy access solder collection chamberSpecs:Input voltage 120VAC 50/60 Hz, 190W...
High Power Desoldering Station with Gun-Style Tool - FR410-52Large, easy-to-read display, 3 User-programable presets, Password lockout, Vacuum system with.02 delay, Easy access solder collection chamberSpecs:Input voltage 120VAC 50/60 Hz, 190W...
Shop Air Desoldering & Soldering Station - FM205-01Built in vacuum pump, Temperature range 200 - 450°C (400 - 840°F), Temperature accuracy +/- 15°C, Quick-change composite nozzles, Sleep mode functionalitySpecs:Power consumption...