The 2A-SA-PI-ET two star straight tapered flat pointed tweezer is designed for handling labels or SMD components. The overall length is 5.25" and it is made of anti-magnetic stainless steel....
The 00-SA-SE-TC15 one star straight medium PTFE coated pointed tweezer is the most popular general purpose tweezer used without magnification. It is made of anti-magnetic stainless steel. The overall length...
The 15A-ST-PE-40 five star 70° angulated stripping tweezer will strip PTFE and other coated wire exactly to AWG gauge without nicking. It will strip 40 AWG wire. It is made...
The 4000-ST general purpose vacuum system produces vacuum of up to ten inches of mercury with an open air flow of 2.3 LPM. The kit comes complete with pen holder...
The 260A three star mini-spatula (oiler) is 2.5" long and has a .010" tip. The handle is plastic and colored black. Mini-spatulas are ideal for placing epoxies or lubricant in...
The 346B two star self-opening precision Scissors with precision cutting blades is ideal for delicate cutting applications. The stainless steel blade is hardened to Rockwell C-50. The overall length is...
The 5-SA-SE one star straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The style 5 has the finest points available. The overall length is 4.25". It is made...
The 2A-SA-SE-TC15 one star straight tapered flat PTFE coated pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75" and it is made of anti-magnetic...
The 2A-SA-TC30 three star straight tapered flat pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75" and it is made of anti-magnetic Neverust? stainless...
The 2A-SA-ET three star straight tapered flat pointed tweezer is designed for handling labels or SMD components. The overall length is 5.25" and it is made of anti-magnetic Neverust® stainless...
The 3C-ESD two star straight 4.5" sharp pointed conductive (10? ohms/sq) plastic tweezer is temperature resistant to 212°F. It will not scratch delicate parts.Product Categories: Tweezers (Forceps) - Plastic Tweezers...
The 9232SL five star Lazer Line® small oval optimum flush cutter has a cutting capacity of .00" - .00" soft wire. It is made of carbon tool steel with induction...
The 907-89B five star 5.75" dog leg lead forming plier is a heavy duty plier designed to increase or decrease the center dimension on radial lead components. It features soft...
The 7-SA-SE-ET one star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of anti-magnetic stainless steel. The overall length is 5"....
The 181A-SE two star scalpel handle works with the 181-22 blades.Product Categories: Small Hand ToolsApplication: For use with 181-22 bladeTip Angle: n/a OAL: 5.5" (137.5mm)Max per Carton: 12Country of Origin:...
The 343 two star stainless steel 7" long double ended spatula has a round handle. One end has rounded blade 1.25" long and .32" wide. Primarily used for applying or...
The 335B three star short 90° angle stainless steel micro probe has 1 mil tip. The overall length is 4.75".Product Categories: Small Hand Tools - Probes, Scribes, Dotting PensBody Width...
The 260C three star ESD safe mini-spatula (oiler) is 2.5" long and has a .020" tip. The handle is plastic and colored green. Mini-spatulas are ideal for placing epoxies or...
The 260B three star mini-spatula (oiler) is 2.5" long and has a .015" tip. The handle is plastic and colored blue. Mini-spatulas are ideal for placing epoxies or lubricant in...
The 213A-N three star clean room safe brush has stainless steel handles and new Statigo9 fiber bristles. The bristles are mechanically clamped into the handle for maximum fiber retention. The...
The SE-25 one star small micro shear with tapered head is lightweight and easy to handle. Shear cutting action reduces both cutting effort and mechanical shock transmitted to the component....
The 346-6-HT four star self-opening precision Scissors with precision cutting blades is ideal for hard wire cutting applications. The stainless steel tool has carbide inserts in the blades. Length is...
The 333B two star stainless steel probe with a serrated handle is 5" long with a .020" tip.Product Categories: Laboratory & Cleanroom Instruments - ProbesTip Angle: Straight OAL: 5" (125mm)Weight:...
The 260E-ESD three star mini-spatula (oiler) is 2.5" long and has a .008" tip. The handle is aluminum and colored gold. Mini-spatulas are ideal for placing epoxies or lubricant in...
The 181-22 two star sterile scalpel blade is packaged in individual foil packs. The blade is similar to the #10 blade but has a curved cutting edge and a flat...
The 591-SA-PI two star wafer tweezer for 5" wafers has 5 fingered upper paddle which limits surface contact. The overall length is 5". The tool is made of anti-magnetic stainless...
The 9244E-GM five star Lazer Line® medium tapered maximum flush cutter has a cutting capacity of .005” - .036” soft wire. It is made of carbon tool steel with induction...
The C7145X cutters are made from the highest grade AISI 52/100 carbon steel with tungsten carbide inserts. The extremely hard cutting edge (79-81 Rockwell "C") is excellent for cutting most...
The 5-SA-R Ergo-Tweezers are ideal for working in cleanrooms, while providing operators comfort when using for prolonged periods. The ergonomic handles also offer supior insulation and durability from extreme heat...
The 502-US-28 five star 5.5" high precision stripping plier is ideal for stripping 28 AWG PTFE coated wires. It features a molded antimicrobial static dissipative (10? ohms/sq) ergonomic grips with...
The 330K three star fine stainless steel probe kit with 10 mil tips includes 330A, 330B, 330C, 330D and 330E. The overall length is 6".Product Categories: Small Hand ToolsApplication: Great...
The 260K-ESD three star kit of 5 mini-spatula (oiler) contains a 260AA,260A,260B,260C and 260D. They are 2.5" long with plastic handles. Mini-spatulas are ideal for placing epoxies or lubricants.Product Categories:...
The 15A-ST-PE-40-R 110° angled wire stripping tweezers designed to strip magnet wire coating exactly to AWG gauge without nicking. It is made of carbon steel with flame hardened edges and...
The 159D-RT three star soft replaceable tip tweezer is 5" long with .060" wide tips. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10²...
The 149B-CE two star 5" long straight tweezer with ceramic tips. The ceramic tips are ideal for soldering applications where heat is involved. (Non-replaceable Tips) Product Categories: Tweezers (Forceps)Country of...
The 2A-ESD two star straight 4.625" wide flat pointed tweezer is made of conductive plastic (10? ohms/sq). It is temperature resistant to 212°F. The tip is .07" wide.Product Categories: Tweezers...
The 260AA three star mini-spatula (oiler) is 2.5" long and has a .005" tip. The handle is plastic and colored teal. Mini-spatulas are ideal for placing epoxies or lubricant in...
The 197-ESD two star 25° offset ESD safe (10?-10¹¹? ohms/sq) medium stiff toothbrush style brush has three rows of bristles. The square plastic handle has finger grooves. The brush head...
The TW-900 two star tweezer Kitset® in a pouch includes 00-SA-PI, 2A-SA-PI, 3-SA-PI, 7-SA-PI, 5-SA-PI, AA-SA-PI all made in Italy. They are made of anti-magnetic stainless steel.Product Categories: Tweezers (Forceps)...
The SS-SA-ET three star straight long slender fine precision pointed tweezer is ideal for working in confined areas. Overall length is 6". The tool is made of anti-magnetic Neverust® stainless...
The PVS-04 three star angulated tip with OD of 0.05" and ID of 0.04" is designed for handling very small parts. These tips are ESD safe (10?-10¬π ohms/sq) white acetal...
The M-5-SA-ET three star miniature straight tapered ultra fine pointed tweezers is primarily used for microscopy. The style 5 has the finest points available. Overall length is 3.75". It is...
This straight medium point 5" general purpose tweezer is made of carbon steel and has flame hardened tips for great strength. The nickel plating prevents any oxidation.Product Categories: Tweezers (Forceps)...
The 7142E five star Lazer Line® medium oval optimum flush cutter has a cutting capacity of .001" - .042" soft wire. It is made of carbon tool steel with induction...
The 5B-SA-ET three star 45° bent and tapered ultra-fine pointed tweezer is primarily used for microscopy. The bent tip offers access in very difficult areas. It is made of anti-magnetic...
The 177-SE one star 5" scalpel handle is made of stainless steel with outside finger serrations for positive gripping and easy use. It is clean room safe.Product Categories: Small Hand...
The 15A-GW three star 70° angulated tip cutting tweezer is ideal for general purpose cutting of soft wire up to 0.010". This tool is considered a tip cutter in that...
The 1-PI two star very fine straight precision pointed tweezer is ideal for delicate applications. It is designed for bending and handling very fine wires and components. Overall length 4.5"....
The 00 three star straight medium pointed tweezer is the most popular general purpose tweezer used without magnification. It is made of carbon tool steel with flame hardened tips. The...
The 5-S-ET three star straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The style 5 has the finest points available. The overall length is 4.75". It is made...
The 15A-RW three star 70° angulated round tip cutting tweezer is ideal for general purpose cutting of soft wire up to 0.010". The cutting blade is much shorter than the...
The 609-ESD two star straight 4 5/8" wide point (1/8") conductive plastic tweezer is ESD safe (10? ohms/sq). The 609-ESD is temperature resistant to 212° F.Product Categories: Tweezers (Forceps) -...
The C7244X cutters are made from the highest grade AISI 52/100 carbon steel with tungsten carbide inserts. The extremely hard cutting edge (79-81 Rockwell "C") is excellent for cutting most...
The 00D-SA-SE-ET one star straight medium pointed tweezer is the most popular general purpose tweezer used without magnification. It is made of anti-magnetic stainless steel. The overall length is 5.25"....
The M-159A-RT is a straight soft replaceable tip tweezer with a tip size of .025" x .015". These miniature straight soft replaceable tip tweezers have very high rigidity, excellent tensile...
The JLS-6 straight large .071" point tweezer is ideal for handling large gems. The handles are serrated for better control. This tool features a 'slide lock' to lock the tweezers...
The JB-1 straight large .071" point tweezer is ideal for handling large gems. The handles are serrated for better control. The black oxide finish prevents glare. This tool features a...
The F-3-SE is a curved dressing forceps used for compressing or grasping tissues,  handling sterile dressings, and other purposes. The serrated tips give more gripping power and the curved design increase visibility.Product Categories: Laboratory & Cleanroom Instruments - Tweezers (Forceps)...
The F-2-SE eye dressing forceps are thumb forceps used for holding dressing materials during ophthalmic procedures. This product is straight with extra delicate, serrated tips and a length of 4...
The 749A-CE two star 5" long curved with ceramic tips. The ceramic tips are ideal for soldering applications where heat is involved. Product Categories: Tweezers (Forceps)Country of Origin: China
The 7376E Lazer Line® sub-miniature 40° angled, EXTREME TIP cutter is made of AISI 52/100 carbon tool steel with induction hardened cutting blades to RHC 63-65. The CNC machining allows...
The 510-US five star 5.25" long adjustable V-notch stripper is a precision wire stripper with locking set-screw and can be adjusted for stripping 18-30AWG wire. It features a molded antimicrobial...
The 500-92-US five star 5.5" TO-92 lead forming plier has slots on the outside jaw to help the plier fit between the leads of a TO-92 and flare them out...
The 42I is a 5.5" Carbon Steel Flat Nose Plier. Excellent for fine ajustment work and staightening small wires. Precision lap joint allows perfect jaw alignment. Smooth jaw prevents nicking.Product...
The 24-4-SE eye dressing forceps are thumb forceps used for holding dressing materials during ophthalmic procedures. This product is straight with extra delicate, serrated tips and a length of 4...
The 159E-RT three star soft replaceable tip tweezer is 5" long with .12" wide tips. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10²...
The 37-SE two star stainless steel locking hemostat with straight serrated jaws is clean room safe. The overall length is 6".Product Categories: Laboratory & Cleanroom Instruments - Hemostats/Clamps - StraightApplication:...
The 331A three star fine straight stainless steel probe has 10 mil tip and is designed for work under magnification. The overall length is 3".Product Categories: Small Hand Tools -...
The 3-S-SE one star straight very fine precision pointed tweezer is designed for work under magnification. The overall length is 4.75" and its made of stainless steel.Product Categories: Tweezers (Forceps)...
The 291 two star medium curved fine blade stainless steel Scissors is precision-made Scissors for general use. The overall length is 3.75" and the blade length is 1".Product Categories: Scissors...
The 2843L two star medium round nose plier has an overall length is 6". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 27-SA three star straight flat tipped tweezer with tips that are .25" x .02" is very useful when straightening component or lead wires. It is made of anti-magnetic Neverust®...
The 24-SA-SE one star 45° bent strong serrated tipped tweezer is ideal for general applications. It is made of anti-magnetic stainless steel and has serrated grips for better control. The...
The RU-1 is a 6" plastic ruler.Product Categories: Laboratory - Misc. Hand ToolsTip Angle: n/a OAL: 6"(150mm)Weight: 0.1 Ounces Max per Carton: MOQ pk/24Country of Origin: Pakistan
The MM-SE one star 'Boley Style' 5" straight strong pointed general purpose tweezer is made of carbon steel with flame hardened tips that will not bend.Product Categories: Tweezers (Forceps) -...
The KST-10-SE one star tweezer Kitset in wooden box includes AA-SA-SE, 00-SA-SE, 00D-SA-SE, 1-SA-SE, 2-SA-SE, 2A-SA-SE, 3C-SA-SE, 5-SA-SE, 5A-SA-SE, 7-SA-SE all made of anti-magnetic stainless steel.Product Categories: Tweezers (Forceps) -...
This black Buna-N non-marring vacuum cup (-5° to 250°F) is .5" in diameter. It is for use on all our vacuum tools with the exception of the Roto-Pic® and the...
The 890L-SA three star wafer tweezer for 8" wafers has a solid upper paddle which allows greater surface contact. Overall length is 7". It is made of anti-magnetic Neverust® stainless...
The 691D-SA-PI two star wafer tweezer for 6" wafers has 6 fingered upper paddle which limits surface contact. The overall length is 5". The tool is made of anti-magnetic stainless...
The 51-T two star tubing and cable cutter is stainless steel and offers a smooth clean cut on plastic tubing and soft cables. The cutting capacity is .38" and the...
The 51-SA three star 45° offset oblique angle micro-fine tipped tweezer is ideal for working under a scope. The offset oblique tips offer very good visibility. The tool is 4.5"...
The 3C-SA-EC three star straight very fine precision pointed tweezer is designed for work under magnification. The overall length is 4.25" and its made of anti-magnetic Neverust® stainless steel. The...
The 371A three star Lexar Scissors features stainless steel construction with tungsten carbide inserts. This straight blade Scissors has gold plated handles. The Carbide insert allows the tool to cut...
The 361 four star extra fine blade medical grade Scissors is stainless steel with 1" curved blades. It is ideal for ultra miniature work in confined areas.Product Categories: Scissors -...
The 353 tempered stainless steel (AISI 420) high precision scissors feature blunt tipped safety blades. They provide a comfortable grip with a contemporary design. The sleek, twisted frame gives them...
The 31-SA-C three star reverse action 45° angle tipped tweezer has tips bent at a 45 degree angle for better visibility. The tip is .02" wide x .008" high. It...
The 2AB-N three star 43° curved flat pointed tweezer designed for handling labels or SMD components. The curved tips offer better visibility. The overall length is 4.5" and is made...
The 299 two star heavy duty, general purpose Scissors has serrated outside blade edges. The overall length is 5" and blade length is 1.75".Product Categories: Scissors - Standard ScissorsBody Width...
The 273 Dissection and Dressing Scissors featuring pointed tipped blades. The 270 scissors has 60° blades for excellent visibility. Made of surgical stainless steel.Product Categories: Scissors - Laboratory ScissorsBody Width...
The 271 two star straight stainless steel Scissors with extra-long handles provides better cutting leverage. The overall length is 4.75" and the blade length is 1.25".Product Categories: Scissors - Standard...
The 270-HT four star 60° angled Scissors is made of stainless steel. It has slim carbide blades and offers good surface clearance. The carbide blades strong, allowing the cutting of...
The 268A is a nylon refill for 268 scratch brush.Product Categories: Brushes - Scratch Brushes - RefillsBody Width x Body Height: n/a x n/aTip Angle: Straight OAL: n/aWeight: 0.1 Ounces...
The 268 two star nylon retractable and refillable scratch brush has a plastic handle. It can be used for fine deburring, polishing, rust removal, or cleaning and erasing in chemical...
The 20A-1-SE is a medium tipped tweezer featuring a guide pin for perfect aligment of the tips. The tool has serrated grips for better control.Product Categories: Laboratory & Cleanroom Instruments...
The 181-SE two star #3 scalpel handle works with the 181-10 blades.Product Categories: Small Hand Tools - ScalpelsTip Angle: Straight OAL: 5" (125mm)Weight: 0.71 Ounces Max per Carton: 12Country of...
The 179A is a one star straight tipped scalpel with a blade length of 1.5" and is made of Stainless SteelProduct Categories: Small Hand Tools - ScalpelsTip Angle: Straight OAL:...
The 177-15 is a #15 fine stainless steel scalpel blade.Product Categories: Small Hand Tools - ScalpelsBody Width x Body Height: n/a x n/aTip Angle: n/a OAL: n/aWeight: 0.01 Ounces Max...
The 177-12 is a #12 curved stainless steel scalpel blade.Product Categories: Small Hand Tools - ScalpelsBody Width x Body Height: n/a x n/aTip Angle: 45° OAL: n/aWeight: 0.01 Ounces Max...
The 177-11 is a #11 angled stainless steel scalpel blade.Product Categories: Small Hand Tools - ScalpelsBody Width x Body Height: n/a x n/aTip Angle: 10° OAL: n/aWeight: 0.01 Ounces Max...
The 175-11 three star disposable safety scalpel has a small handle that will fit between your thumb and index finger. It is easy to use and comes with a number...
The 15A-ST-PE-44 five star 70° angulated stripping tweezer will strip PTFE and other coated wire exactly to AWG gauge without nicking. It will strip 44 AWG wire. It is made...
The 15A-ST-PE-32 five star 70° angulated stripping tweezer will strip PTFE and other coated wire exactly to AWG gauge without nicking. It will strip 32 AWG wire. It is made...
The 147AT two star 6" long stainless steel carbide insert compound action cutter is designed for small hard wire .005"(.03mm) - .030"(.75mm). It features cushioned ESD safe (10¬π? ohms/sq) grips...
The 7-TA titanium alloy tweezers are designed for high temperature applications (806°F (430°C). They are also very light and have high resistance to most acids. They have zero magnetic retentivity...
The 6-S three star 70° angled flat sharp precision pointed tweezer can be utilized in a variety of applications, such as manipulating very minute components or parts. The overall length...
The 3C-SA-PI two star straight very fine precision pointed tweezer is designed for work under magnification. The overall length is 4.25" and its made of anti-magnetic stainless steel.Product Categories: Tweezers...
The PV-100 three star tweezer vacuum system, push button vacuum control pen, non-ESD safe, pulls 6 inches of mercury and comes with 9 vacuum tips and no skid rubber feet.Product...
The PV-10 three star Vacula® self-contained vacuum pickup tool has a stainless steel body and is .38" in diameter. It uses plunger-generated vacuum. The kit comes with one .25", .38"...
The 401 three star Magna-lite® illuminated optical magnifier has 5X power. Lens dimension is 1.25" square. It is perfect for quality control and inspection personnel. It comes with an unbreakable...
The 549EA-US-060 5.25" 45° angulated head shear cutter reduces shock on delicate solder connections or components. It is a thinner version of the 549E-US. The angle of the cutting head...
The 549EA-US-050 5.25" 45° angulated head shear cutter reduces shock on delicate solder connections or components. It is a thinner version of the 549E-US. The angle of the cutting head...
The 549EA-US-040 5.25" 45° angulated head shear cutter reduces shock on delicate solder connections or components. It is a thinner version of the 549E-US. The angle of the cutting head...
The 549EA-US-30 5.25" 45° angulated head shear cutter reduces shock on delicate solder connections or components. It is a thinner version of the 549E-US. The angle of the cutting head...
The 549EA-US-20 5.25" 45° angulated head shear cutter reduces shock on delicate solder connections or components. It is a thinner version of the 549E-US. The angle of the cutting head...
The 169C-RTX replacement tips for 169B-RT contains 2 tips and 3 screws. Carbofib‚Ñ¢ is a polymer based material with 30% carbon fibers added. This material has very high rigidity, excellent...
The R-15A-GW is a completely refurbished and inspected cutting tweezer. It features a 70° angulated round tip cutting head and is ideal for general purpose cutting of soft wire up...
The R-9231 five star Lazer Line® small oval maximum flush factory reconditioned cutter has a cutting capacity of .040" soft wire. It is made of carbon tool steel with induction...
The 00-SA-EC straight medium pointed tweezer is the most popular general purpose tweezer used without magnification. It is made of anti-magnetic Neverust® stainless steel. The overall length is 4.5". The...
The 11I medium chain nose plier has an overall length is 4.8". It is stainless steel and features our soft cushioned Anti-Static grips (10¬π? ohms/sq surface resistivity) and includes dual...
The 159B-RT soft replaceable tip tweezer is 5" long with .040" wide tips. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10² ohms/sq). Carbofib™...
The 15A-GW-PB 70° angulated tip cutting tweezer is ideal for general purpose cutting of soft wire up to 0.010". The overall length is 4.5". It is made of carbon steel...
The 15A-HT 45° angulated tip cutting tweezer is ideal for general purpose cutting of hard wire up to 0.010". This tool is considered a tip cutter in that the blades...
The 15A-RW-PB 70° angulated round tip cutting tweezer is ideal for general purpose cutting of soft wire up to 0.010". The cutting blade is much shorter than the 15A-GW and...
Versatile tool case for tweezers, cutters, pliers and various precision instruments. Includes plastic case, foam insert and tweezer tray with slots to hold 15 tweezers.
The 169A-RT is a soft replaceable tip 5" tweezer with .020" wide tips. The tips are made of a Carbofib‚Ñ¢ material which is a polymer based material with 30% carbon...
The 169A-RTX replacement tips for 169A-RT or 169A-RTN contains 2 tips and 3 screws. Carbofib‚Ñ¢ is a polymer based material with 30% carbon fibers added. This material has very high...
The 169B-RT is a soft replaceable tip 5" tweezer with .040" wide tips. The tips are made of a Carbofib‚Ñ¢ material which is a polymer based material with 30% carbon...
The 169C-RT is a soft replaceable tip 5" tweezer with .080" wide tips. The tips are made of a Carbofib‚Ñ¢ material which is a polymer based material with 30% carbon...
The 169D-RT is a soft replaceable tip 5" tweezer with .060" wide tips. The tips are made of a Carbofib‚Ñ¢ material which is a polymer based material with 30% carbon...
The 169D-RTWX replacement tips for 169D-RTW contains 2 tips and 3 screws. Acetal has outstanding resistance to chemicals and solvents. It is excellent for cleanroom use.
The 169D-RTX replacement tips for 169B-RT contains 2 tips and 3 screws. Carbofib‚Ñ¢ is a polymer based material with 30% carbon fibers added. This material has very high rigidity, excellent...
The 169E-RT is a soft replaceable tip 5" tweezer with .120" wide tips. The tips are made of a Carbofib‚Ñ¢ material which is a polymer based material with 30% carbon...
The 169-RT is a soft replaceable tip 5" tweezer with .011" wide tips. The tips are made of a Carbofib‚Ñ¢ material which is a polymer based material with 30% carbon...
The 169-RTX replacement tips for 169-RT contains 2 tips and 3 screws. Carbofib‚Ñ¢ is a polymer based material with 30% carbon fibers added. This material has very high rigidity, excellent...
The 24-SA-SE-PH 45° bent strong serrated tipped tweezer is ideal for general applications. It is made of anti-magnetic stainless steel and has serrated grips for better control. The overall length...
The 2844D medium chain nose serrated jaw plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action. It features...
The 2A-SA-EC straight tapered flat pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75" and it is made of anti-magnetic Neverust® stainless steel. The...
The 3C-SA-EC straight very fine precision pointed tweezer is designed for work under magnification. The overall length is 4.25" and its made of anti-magnetic Neverust® stainless steel. The tips measure...
The 508-US metal jaw straightening plier uniquely straightens multiple leads in one easy operation. The overall length is 5.5" while the jaws are .825" wide. It features an ergonomically molded...
The 530E-US-20 shear action cutter reduces shock on delicate components and solder connections. The "Stand-Off" keeps the cutting blade from cutting into the solder connections. The tip width is .140"....
The 5-SA-EC straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The style 5 has the finest points available. The overall length is 4.25". It is made of anti-magnetic...
The 7251E large oval optimum flush cutter has a cutting capacity of .008" to .060" soft wire. It is made of carbon steel. It features a ergonomically molded antimicrobial Anti-Static...
The 769-RTX replacement tips for 769-RT contains 2 tips and 4 screws. Carbofib® is a PTFE based conductive (10² ohms/sq) material with 30% carbon fibers added. Working temp is 249°...
The 769D-RT is a soft replaceable tip Curved 5" tweezer with .070" wide tips. The tips are made of a Carbofib‚Ñ¢ material which is a polymer based material with 30%...
The 769-RT is a soft replaceable tip Curved 5" tweezer with .011" wide tips. The tips are made of a Carbofib‚Ñ¢ material which is a polymer based material with 30%...
The 7-SA-EC 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of anti-magnetic Neverust® stainless steel. The overall length is 4.5". It...
The 7-SA-R 4.7" long Ergo-Tweezers are ideal for working in cleanrooms, while providing operators comfort when using for prolonged periods. The ergonomic handles also offer supior insulation and durability from...
The 903-CUSTOM 5.5" heavy duty anti-shock shear cutter is designed for cutting of connector pins and large component leads. Tip width is .18". Recommended cutting capacity is 18AWG (.040" diameter)....
The 903-60 5.5" heavy duty anti-shock shear cutter is designed for cutting of connector pins and large component leads. Tip width is .18". Recommended cutting capacity is 18AWG (.040" diameter)....
The 903-50 5.5" heavy duty anti-shock shear cutter is designed for cutting of connector pins and large component leads. Tip width is .18". Recommended cutting capacity is 18AWG (.040" diameter)....
The 903-40 5.5" heavy duty anti-shock shear cutter is designed for cutting of connector pins and large component leads. Tip width is .18". Recommended cutting capacity is 18AWG (.040" diameter)....
The 903-30 5.5" heavy duty anti-shock shear cutter is designed for cutting of connector pins and large component leads. Tip width is .18". Recommended cutting capacity is 18AWG (.040" diameter)....
The 903-20 5.5" heavy duty anti-shock shear cutter is designed for cutting of connector pins and large component leads. Tip width is .18". Recommended cutting capacity is 18AWG (.040" diameter)....
The 907-1-CUSTOM 6" large anti-shock shear cutter reduces shock on delicate solder connections and sensitive components. The tip width is .170. Recommended cutting capacity is 20AWG (.032" diameter). Customer supplied...
The 907-1-060 6" large anti-shock shear cutter reduces shock on delicate solder connections and sensitive components. The tip width is .170. Recommended cutting capacity is 20AWG (.032" diameter). Standard cut...
The 907-1-050 6" large anti-shock shear cutter reduces shock on delicate solder connections and sensitive components. The tip width is .170. Recommended cutting capacity is 20AWG (.032" diameter). Standard cut...
The 907-1-040 6" large anti-shock shear cutter reduces shock on delicate solder connections and sensitive components. The tip width is .170. Recommended cutting capacity is 20AWG (.032" diameter). Standard cut...
The 907-1-030 6" large anti-shock shear cutter reduces shock on delicate solder connections and sensitive components. The tip width is .170. Recommended cutting capacity is 20AWG (.032" diameter). Standard cut...
The 907-1-020 6" large anti-shock shear cutter reduces shock on delicate solder connections and sensitive components. The tip width is .170. Recommended cutting capacity is 20AWG (.032" diameter). Standard cut...
The 907-4-CUSTOM 6" thin jaw anti-shock shear cutter. The thinner jaw gives greater accessibility into high-density areas. Very useful for cutting connector pins in confined areas. Tip width is .100"....
The 907-4-060 6" thin jaw anti-shock shear cutter. The thinner jaw gives greater accessibility into high-density areas. Very useful for cutting connector pins in confined areas. Tip width is .100"....
The 907-4-050 6" thin jaw anti-shock shear cutter. The thinner jaw gives greater accessibility into high-density areas. Very useful for cutting connector pins in confined areas. Tip width is .100"....
The 907-4-040 6" thin jaw anti-shock shear cutter. The thinner jaw gives greater accessibility into high-density areas. Very useful for cutting connector pins in confined areas. Tip width is .100"....
The 907-4-030 6" thin jaw anti-shock shear cutter. The thinner jaw gives greater accessibility into high-density areas. Very useful for cutting connector pins in confined areas. Tip width is .100"....
The 907-4-020 6" thin jaw anti-shock shear cutter. The thinner jaw gives greater accessibility into high-density areas. Very useful for cutting connector pins in confined areas. Tip width is .100"....
The 907-5-CUSTOM 5.25" connector pin shear cutting plier is designed with grooves on the outside of the jaws to fit between connector pins and provide a clean cut. The tip...
The 907-5-060 5.25" connector pin shear cutting plier is designed with grooves on the outside of the jaws to fit between connector pins and provide a clean cut. The tip...
The 907-5-050 5.25" connector pin shear cutting plier is designed with grooves on the outside of the jaws to fit between connector pins and provide a clean cut. The tip...
The 907-5-040 5.25" connector pin shear cutting plier is designed with grooves on the outside of the jaws to fit between connector pins and provide a clean cut. The tip...
The 907-5-030 5.25" connector pin shear cutting plier is designed with grooves on the outside of the jaws to fit between connector pins and provide a clean cut. The tip...
The 907-5-020 5.25" connector pin shear cutting plier is designed with grooves on the outside of the jaws to fit between connector pins and provide a clean cut. The tip...
The 907-59-CUSTOM 5.75" angulated head shear cutter. The shear action cut reduces shock on delicate solder connections or components. The angle of the cutting head helps to increase visibility. Recommended...
The 907-59-060 5.75" angulated head shear cutter. The shear action cut reduces shock on delicate solder connections or components. The angle of the cutting head helps to increase visibility. Recommended...
The 907-59-050 5.75" angulated head shear cutter. The shear action cut reduces shock on delicate solder connections or components. The angle of the cutting head helps to increase visibility. Recommended...
The 907-59-040 5.75" angulated head shear cutter. The shear action cut reduces shock on delicate solder connections or components. The angle of the cutting head helps to increase visibility. Recommended...
The 907-59-030 5.75" angulated head shear cutter. The shear action cut reduces shock on delicate solder connections or components. The angle of the cutting head helps to increase visibility. Recommended...
The 907-59-020 5.75" angulated head shear cutter. The shear action cut reduces shock on delicate solder connections or components. The angle of the cutting head helps to increase visibility. Recommended...
The M-5-SA miniature straight tapered ultra fine pointed tweezers is primarily used for microscopy. The style 5 has the finest points available. Overall length is 3.13". It is made of...
Excelta Tweezers - Mini Replaceable Acetal .04" x .038" Tip - Straight - M-159B-RTWThe M-159B-RTW has a tip size of .04" x .038". These miniature straight soft replaceable tip tweezers...
Excelta Tweezer Kitset - 1 Star - Anti-Mag. SS - 10 pc - Wooden Case - KST-10-SE-PThe KST-10-SE-P tweezer Kitset in Plastic case includes AA-SA-SE, 00-SA-SE, 00D-SA-SE, 1-SA-SE, 2-SA-SE, 2A-SA-SE,...
Excelta Tweezers - Tapered Ultra Fine Point - Reverse Action - Anti-Mag. SS - DN-5-SAThis reverse action straight tapered very fine tipped 4.75" tweezer is made of anti-magnetic stainless steel....
Excelta Cutters - Taper Head - Opt. Flush Cut - Carbon w/Carbide Inserts - Long Handle - C7144XThe C7144X optimum flush cutters are made from the highest grade AISI 52/100...
Excelta Tweezers - 2 Star Straight Very Fine Point - Anti-Mag. SS - Super Ergo - 3C-SA-PI-ET2The 3C-SA-PI-ET straight very fine precision pointed tweezer is designed for work under magnification....
Excelta Tweezer - Beauty - Slanted - SS - SL-TThis beautiful stainless steel tweezer is a must-have tool for brow shaping and maintaining. It is epoxy coated in teal. Precision...
Excelta Tweezer Kitset - 3 Star - Anti-Mag. SS - 5 pc - Plastic Case - KST-5-PThe KST-5-P tweezer Kitset in plastic case includes 1-SA, 2-SA, 3C-SA, 5-SA, 7-SA all...
Excelta Tweezer Kitset - Replaceable Carbofib Tip - Plastic Case - KST-159-PThe KST-159 is a 4 piece kit which includes the BLP6TW plastic case. The kit includes 15-RT,159A-RT,159B-RT,159D-RT. All are...
Excelta Tweezer Kitset - Replaceable Carbofib Tip - Vinyl Case - KST-159The KST-159 is a 4 piece kit which includes the vinyl case. The kit includes 15-RT,159A-RT,159B-RT,159D-RT. All are replaceable...
Excelta Tweezer - 3 Star Straight Medium point - Brass - AMThis straight medium point 5" general purpose tweezer is made of Brass. Designed for application for soft handling.
Excelta Cutters - Large Tapered Relieved Head - Laser Flush - Slim Line - Black Oxide Coated - 9258SLThe Slim Line 9258SL Lazer Line?large tapered/relieved laser flush cutter has a...
Excelta Cutters - Large Tapered Head - Optimum Flush - Slim Line - Black Oxide Coated - 9254SLThe Slim Line 9254SL Lazer Line?large tapered optimum flush cutter has a cutting...
Excelta Cutters - Large Oval Head - Optimum Flush- Slim Line - Black Oxide Coated - 9251SLThe Slim Line 9251SL optimum flush new and improved Lazer Line?large SLIM LINE oval...
Excelta Tweezers - 2 Star Straight Tapered Flat Point - Anti-Mag. SS - Super Ergo - 2A-SA-PI-ET2The 2A-SA-PI-ET2 straight tapered flat pointed tweezer is designed for handling labels or SMD...
Excelta Cutters - Large Oval Head - Semi-Flush - Slim Line - Black Oxide Coated - 9250SLThe Slim Line 9250SL Lazer Line?large oval semi-flush cutter has a cutting capacity of...
Excelta Pliers - Cut & Form Multiple Lead Flat Pack - Carbon Steel - 907-ICCThe 907-ICC 6.5" tool forms the leads of a DIP/IC for surface mount at a height...
Excelta Tweezers - 2 Star Curved Very Fine Point - Anti-Mag. SS - Super Ergo - 7-SA-PI-ET2The 7-SA-PI-ET2 45?curved tapered very fine precision point tweezer allows maximum visibility under magnified...
Excelta Tweezers - 3 Star Curved Very Fine Point - Anti-Mag. SS - Mirror Polished Tips - 7-SA-MPThe 7-SA-MP 45?curved tapered very fine precision point tweezer allows maximum visibility under...
Excelta Tweezers - 1 Star Angulated Flat Sharp Point - Anti-Mag. SS - Ergo - 6-SA-SE-ETThe 6-SA-SE-ET 70?angled flat sharp precision pointed tweezer can be utilized in a variety of...
Excelta Tweezers - Replaceable Tips for 169E-RT - - 169E-RTXThe 169E-RTX replacement tips for 169E-RT contains 2 tips and 3 screws. Carbofib?is a polymer based material with 30% carbon fibers...
Excelta Tweezers - 1 Star Straight Tapered Ultra Fine Point - Anti-Mag. SS - Ergo - 5-SA-SE-ETThe 5-SA-SE-ET straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The style...
Excelta Tweezers - 2 Star Straight Tapered Ultra Fine Point - Anti-Mag. SS - Super Ergo - 5-SA-PI-ET2The 5-SA-PI-ET2 straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The...
Excelta Tweezers-Replaceable PTFE .065" x .04" Tips - Straight - 163-RTThe 163-RTN 'Static Safe' replaceable tip tweezers provide a controlled bleed-off of static charges while maintaining typical PTFE properties such...
Excelta Tweezers - 3 Star Straight Tapered Ultra Fine Point - Anti-Mag. SS - Mirror Polished Tips - 5-SA-MPThe 5-SA-MP straight tapered ultra-fine pointed tweezers is primarily used for microscopy....
Excelta Pliers - Lock-in Lead Forming - 1st bend .060" - 554TXC-USThe 554TXC-US 5.5" shear cutting and forming plier will form one lead in and one lead out at the...
Excelta Pliers - Lock-in Lead Forming - 1st bend .030" - 554TXB-USThe 554TXB-US 5" stress relief forming plier will form stress relief in most radial lead components. It is designed...
Excelta Tweezers - Cutting - Angulated - Carbon Steel - With Hone of X - 15A-SW-HThe 15A-SW-H 70?angulated radius edge cutting tweezer with a hone of X is designed with...
Excelta Cutters - Right Handed Oblique 45?Anti-Shock Shear - .040" Standoff - 549EA-USThe 549EA-US 5.25" 45?angulated head shear cutter reduces shock on delicate solder connections or components. It is a...
Excelta Tweezers - 3 Star Cutting - 15A-RW Series - Carbon Steel - Ergo - Cleanroom - 15A-RW-RThe 15A-RW-R 70?angulated round tip cutting tweezer is ideal for general purpose cutting...
Excelta Tweezers - 3 Star Straight Very Fine Point - Anti-Mag. SS- Radiused edges - blunt tips - 3C-SA-MZThe 3C-SA-MZ straight very fine precision pointed tweezer is designed for work...
Excelta Tweezers - Replaceable Carbon Fiber Tips for 159G-RT - 159G-RTXThe 159G-RTX replacement tips for 159G-RT contain 2 tips and 4 screws. The Carbofib?tips are a polymer based material with...
Excelta Tweezers - 3 Star Straight Very Fine Point - Anti-Mag. SS - Mirror Polished Tips - 3C-SA-MPThe 3C-SA-MP straight very fine precision pointed tweezer is designed for work under...
Excelta Tweezers - For 3" wafers - Bent Fingered Paddle - 391B-SA-PIThe 391B-SA-PI wafer tweezer for 3" wafers has 3 fingered upper paddle which limits surface contact. The overall length...
Excelta Tweezers - Replaceable Carbon Fiber Tips for 159F-RT - 159F-RTXThe 159F-RTX replacement tips for 159F-RT contain 2 tips and 4 screws. The Carbofib?tips are a polymer based material with...
Excelta Tweezers - Replaceable Carbon Fiber .08" x .05" Tip - Straight - 159F-RTThe 159F-RT soft replaceable tip tweezer is 5" long with .08" x .05" tips. The Carbofib?tips are...
Excelta Tweezers - For 3" wafers - Bent Solid Upper Paddle w/Lip - 390LB-SA-PIThe 390LB-SA-PI wafer tweezer for 3" wafers has a solid upper paddle which allows greater surface contact....
Excelta Tweezers - 1 Star Straight Tapered Flat Point - Anti-Mag. SS - Ergo - 2A-SA-SE-ETThe 2A-SA-SE-ET straight tapered flat pointed tweezer is designed for handling labels or SMD components....
Excelta Tweezers - 3 Star Straight Tapered Flat Point - Anti-Mag. SS - Mirror Polished Tips - 2A-SA-MPThe 2A-SA-MP straight tapered flat pointed tweezer is designed for handling labels or...
Excelta Tweezers - 1 Star 8" Straight Strong Point - Anti-Mag. SS - Serrated - 21-SA-SE-8The 21-SA-SE-8 straight strong serrated tipped tweezer is ideal for general applications. It is made...
Excelta Tweezers - 1 Star 24" Straight Strong Point - Anti-Mag. SS - Serrated - 21-SA-SE-24The 21-SA-SE-24 straight strong serrated tipped tweezer is ideal for general applications. It is made...
Excelta Tweezers-Replaceable PTFE .05" x .04" Tips - Cross Action - 163-RTNThe 163-RTN 'Static Safe' replaceable tip tweezers provide a controlled bleed-off of static charges while maintaining typical PTFE properties...
Excelta Tweezers - Straight Fine Point - Acetal - 7 LERThe 7 LER glass filled acetal very fine point tweezer is 4.57" long. It is great for applications requiring soft...
Excelta Tweezers-Replaceable PTFE .248" x .6" Tips - Cross Action - 163B-RTNThe 163B-RTN 'Static Safe' replaceable tip tweezers provide a controlled bleed-off of static charges while maintaining typical PTFE properties...
Excelta Tweezers-Replaceable PTFE .05" x .05" Tips - Cross Action - 163A-RTNThe 163A-RTN 'Static Safe' replaceable tip tweezers provide a controlled bleed-off of static charges while maintaining typical PTFE properties...
Excelta Tweezers - Stripping XX AWG - Angulated - Carbon Steel - 15A-ST-PE-CUSTOMThe 15A-ST-PE-CUSTOM 70?ngulated stripping tweezer will strip PTFE and other coated wire exactly to AWG gauge without nicking....
Excelta Tweezers - 2 Star Cutting - 15A-GW Series - Carbon Steel - Ergo - 15A-GW-PI-ETThe 15A-GW-PI-ET 70?angulated tip cutting tweezer is ideal for general purpose cutting of soft wire...
Excelta Tweezers - Replaceable Carbon Fiber .005" x .025" Tip - Straight - 159G-RTThe 159G-RT soft replaceable tip tweezer is 5" long with .005" x .025" tips. The Carbofib?tips are...
Excelta Tweezers - 2 Star Straight Strong Medium Point - Anti-Mag. SS - Super Ergo - 00-SA-PI-ET2The 00-SA-PI-ET straight medium pointed tweezer is the most popular general purpose tweezer used...
Excelta Pliers - Replaceable Tip - Straight - SS - Nylon Inserts - 2831The 2831 flat soft nose plier features a stainless steel body with nylon replaceable jaws.?It is ideal...
Excelta Spatula - Straight - SS - 344The 344 is a stainless steel spatula for mixing, transferring, scraping or applying powders and pasts, like chemicals or treatments.
Excelta Scissors- Straight Fine 1.125" Blade -SS - OAL 4.1" - 295The 295 is a long slender scissors with outside edges radiused to prevent scratching and marring.
Excelta Pliers - Cut & Bend - Cuts lead .06"/bends 35 - 930E-1The 930E-1 5.5" anti-shock shear cutter/bender cuts component leads at .060" then bends the lead keeping the component...
Excelta Scissors - Kevlar - Straight 1.75" Blade - SS - OAL 6" - 299D-GThe 299D-G heavy duty, general purpose Scissors features ergonomic design of the handles and has no...
Excelta Vacuum - Pump - - 2000VThe 2000V is a Rotopic?replacement vacuum pump.The pump generates up to ten inches of mercury and comes complete with a 1/8" adaptor.
Excelta Tweezers - 1 Star Straight Strong Medium Point - Anti-Mag. SS - Serrated Tips - 00D-SA-SEThe 00D-SA-SE straight medium pointed tweezer is the most popular general purpose tweezer used...
The 169C-RTW four star straight acetal replaceable tip 5" tweezer has .08" wide tips. This acetal tipped tweezer is used primarily to prevent marring or scratching of delicate parts. Acetal...
The 169D-RTW four star straight replaceable tip 5" tweezer has .06" wide tips. This acetal tipped tweezer is used primarily to prevent marring or scratching of delicate parts. Acetal has...
The 73E-I is a 5.5" Flush cutting small, thin Transvere Head cutter. Excellent for cutting in high density areas.Product Categories: CuttersApplication: Excellent for cutting in high density areasTip Angle: 90°...
The 691B-SA-PI two star wafer tweezer for 6" wafers has 6 fingered upper paddle which limits surface contact. The overall length is 5". The tool is made of anti-magnetic stainless...
The 2899EHT-CR two star multi-purpose small round semi-flush cutter features stainless steel construction for corrosion resistance and carbide inserts for maximum blade life. Hard wire cutting capacity is .008" -...
The 907-89-SE three star 5.75" dog leg lead forming plier/cutter designed to increase or decrease the center dimension on radial lead components. The added shear cutter saves component prep time....
The M-759-RTW has a tip size of .005" x .025". These miniature 40° curved soft replaceable tip tweezers Acetal tips which are electrically insulative and resistant to temperatures up to...
The 00-SA-SE-ET one star straight medium pointed tweezer is the most popular general purpose tweezer used without magnification. It is made of anti-magnetic stainless steel. The overall length is 5"....
The 116-CF-RTX five star replacement tips are for the 116-CF tweezer. The tips are made of Carbofib™ with a .039" diameter hole. The tips are conductive (10² ohms/sq).Product Categories: Tweezers...
The 15A-GW-PI two star 70° angulated tip cutting tweezer is ideal for general purpose cutting of soft wire up to 0.010". The overall length is 4.5". It is made of...
The 149B-CE-ET two star 5" long straight tweezer with ceramic tips. The ceramic tips are ideal for soldering applications where heat is involved. It features Ergo-Tweeze® soft cushioned grips.Product Categories:...
The 900-88B-SE three star 5.75" stress relief forming plier/cutter designed to form stress relief and cut lead to specific dimension in one easy step. Recommended for .020" diameter or smaller...
The 907-88C-SE three star 6" stress relief forming plier/cutter - the smaller design of this tool will "Stand-Off" the component closer to the PC board. The added shear cutter saves...
The 759D-RTWX three star 40° curved Acetal soft replaceable tips for 759D-RTW. Product Categories: Tweezers (Forceps) - Replaceable Tip Tweezers - AcetalApplication: Curved tips improve visibility/accessibility - Will not scratch...
The 9241E-AV five star Lazer Line® medium oval maximum flush cutter has a cutting capacity of .005" - .040" soft wire. It is made of carbon tool steel with induction...
The C7245XS cutters are made from Stainless Steel with tungsten carbide inserts. The extremely hard cutting edge (79-81 Rockwell "C") is excellent for cutting most types of medical and hard...
The M-759-RT has a tip size of .005" X .025". These miniature 40° curved soft replaceable tip tweezers have very high rigidity, excellent tensile and flexural strength, fatigue and creep...
The Trisista 7 is a three star straight strong serrated tipped tweezer is Jewelers tool. It is made of anti-magnetic Neverust® stainless steel and has double serrated tips for better...
The Trisista 3 is a three star straight strong serrated tipped tweezer is Jewelers tool. It is made of anti-magnetic Neverust® stainless steel and has double serrated tips for better...
The R-277-S is a straight blade Rongeurs with .20" sharp edged scooped shaped tips for removing small pieces of bone or tissueProduct Categories: LaboratoryApplication: for removing small pieces of bone...
The R-277-C is a curved blade Rongeurs with .20" sharp edged scooped shaped tips for removing small pieces of bone or tissueProduct Categories: LaboratoryApplication: for removing small pieces of bone...
The PB-1 three star pocket beeper affords the operator quick discernment of point-to-point continuity. As a transistor and diode tester, it analyzes "in circuit' junctions for go-no/go normality. It indicates...
The M-5-S three star miniature straight tapered ultra fine pointed tweezers is primarily used for microscopy. The style 5 has the finest points available. Overall length is 3.25". It is...
The M-179A-RT four star miniature straight copolymer fine point replaceable tip tweezer is great for work under magnification where delicate parts and wires must not be scratched. Copolymer has a...
The M-159-RT is a straight soft replaceable tip tweezer with a tip size of .012" x .018". These miniature straight soft replaceable tip tweezers have very high rigidity, excellent tensile...
The M-159D-RT is a straight soft replaceable tip tweezer with a tip size of .06" x .015". These miniature straight soft replaceable tip tweezers have very high rigidity, excellent tensile...
The M-159D-RTW has a tip size of .06" x .015". These miniature straight soft replaceable tip tweezers feature Acetal tips which are electrically insulative and resistant to temperatures up to...
The M-159C-RTW has a tip size of .08" x .035". These miniature straight soft replaceable tip tweezers feature Acetal tips which are electrically insulative and resistant to temperatures up to...
The R-275-S is a straight blade Rongeurs with .03" sharp edged scooped shaped tips for removing small pieces of bone or tissueProduct Categories: LaboratoryApplication: for removing small pieces of bone...
The R-275-C is a curved blade Rongeurs with .03" sharp edge scooped shaped tips for removing small pieces of bone or tissue.Product Categories: LaboratoryApplication: for removing small pieces of bone...
The M-159C-RT is a straight soft replaceable tip tweezer with a tip size of .08" x .055". These miniature straight soft replaceable tip tweezers have very high rigidity, excellent tensile...
The M-759D-RTW has a tip size of .06"x .015". These miniature 40° curved soft replaceable tip tweezers Acetal tips which are electrically insulative and resistant to temperatures up to 185°F....
The JST-1 straight medium .0475"point tweezer is ideal for handling medium gems. The handles are serrated for better control. This tool has PTFE coated tips to avoid scratching.Product Categories: Jeweler's...
The M-759D-RT has a tip size of .06" X .018". These miniature 40° curved soft replaceable tip tweezers have very high rigidity, excellent tensile and flexural strength, fatigue and creep...
The JSS-1 straight medium .040"point tweezer is ideal for handling medium gems. The handles are serrated for better control. This tool has 'starlight' coated tips.Product Categories: Jeweler's Instruments - Tweezers...
The M-5-CO-ET five star Cobaltima® miniature tapered ultra fine pointed tweezer with tips .002" wide x .0004" high is ideal for microscopy. This tool includes and ergonomic handle. The tweezer...
The M-3-CO-ET five star Cobaltima® miniature straight very fine pointed tweezer with tips .003" wide x .0016" high is made of a cobalt alloy, which is extremely hard, temperature resistant...
The M-3-CO five star Cobaltima® miniature straight very fine pointed tweezer with tips .003" wide x .0016" high is made of a cobalt alloy, which is extremely hard, temperature resistant...
The JS-5 straight medium" .0475" point tweezer is ideal for handling medium gems. The handles are serrated for better control. Product Categories: Jeweler's Instruments - Tweezers - StandardApplication: Designed for...
The M-159-RT is a straight soft replaceable tip tweezer with a tip size of .005" x .025". These miniature straight soft replaceable tip tweezers have very high rigidity, excellent tensile...
The M-159F-RT is a straight soft replaceable tip tweezer with a tip size of .08" x .05". These miniature straight soft replaceable tip tweezers have very high rigidity, excellent tensile...
The JS-2 straight extra fine .016" point tweezer is ideal for handling extra fine gems. The handles are serrated for better control. Product Categories: Jeweler's Instruments - Tweezers - StandardApplication:...
The JS-3 straight fine .025" point tweezer is ideal for handling fine gems. The handles are serrated for better control. Product Categories: Jeweler's Instruments - Tweezers - StandardApplication: Designed for...
The JS-11 straight large.071" point tweezer is ideal for handling large gems. The handles are serrated for better control. This tool has 'starlight' coated tips.Product Categories: Jeweler's Instruments - Tweezers...
The M-159E-RT is a straight soft replaceable tip tweezer with a tip size of .12" x .038". These miniature straight soft replaceable tip tweezers have very high rigidity, excellent tensile...
The JS-1 straight extra fine .016" point tweezer is ideal for handling extra fine gems. The handles are serrated for better control. The tips are 'starlight' coated.Product Categories: Jeweler's Instruments...
The JS-10 straight medium .035" point tweezer is ideal for handling medium gems. The handles are serrated for better control. This tool has 'starlight' coated tips.Product Categories: Jeweler's Instruments -...
The JLS-3 straight medium .0475" point tweezer is ideal for handling medium gems. The handles are serrated for better control. This tool features a 'slide lock' to lock the tweezers...
The M-159B-RT is a straight soft replaceable tip tweezer with a tip size of .04" x .038". These miniature straight soft replaceable tip tweezers have very high rigidity, excellent tensile...
The JLB-4 straight large point tweezer is ideal for handling large gems. The .071" tips area ideal for handling large gems. The black oxide finish prevents glare. This tool features...
The JLB-3 straight large point tweezer is ideal for handling large gems. The .071" tips area ideal for handling medium gems. The black oxide finish prevents glare. This tool features...
The JST-2 straight large .071" point tweezer is ideal for handling large gems. The handles are serrated for better control. This tool has PTFE coated tips to avoid scratching.Product Categories:...
The JLB-2 straight medium point tweezer is ideal for handling medium gems. The .035" tips area ideal for handling medium gems. The black oxide finish prevents glare. This tool features...
The JS-8 straight large .071" point tweezer is ideal for handling large gems. The handles are serrated for better control. The longitudinal groove in the tips 'seat' the gem in...
The JS-9 straight extra large .094" point tweezer is ideal for handling extra large gems. The handles are serrated for better control. The longitudinal groove in the tips 'seat' the...
The JB-2 straight medium .0475" point tweezer is ideal for handling medium gems. The handles are serrated for better control. The black oxide finish prevents glare. This tool features a...
The JS-7 straight large .071" point tweezer is ideal for handling large gems. The handles are serrated for better control. Product Categories: Jeweler's Instruments - Tweezers - StandardApplication: Designed for...
The JS-6 straight medium" .0475" point tweezer is ideal for handling medium gems. The handles are serrated for better control. The longitudinal groove in the tips 'seat' the gem in...
The JS-4 straight medium" .035" point tweezer is ideal for handling medium gems. The handles are serrated for better control. Product Categories: Jeweler's Instruments - Tweezers - StandardApplication: Designed for...
The F-5-SE is a straight dressing forceps used for compressing or grasping tissues,  handling sterile dressings, and other purposes. The serrated tips give more gripping power and the serrated grips allow for positive control.Product Categories: Laboratory & Cleanroom Instruments -...
The F-7-SE two star straight dressing forceps are used for holding dressing materials during procedures. It has serrated tips for better gripping.Product Categories: Laboratory & Cleanroom Instruments - Tweezers (Forceps)...
The JLS-5 straight medium .0475" point tweezer is ideal for handling medium gems. The handles are serrated for better control. This tool features a 'slide lock' to lock the tweezers...
The JLS-4 straight medium .0475" point tweezer is ideal for handling medium gems. The handles are serrated for better control. This tool features a 'slide lock' to lock the tweezers...
This Adson tissue large forceps (1 X 2 teeth) is used for holding and manipulating delicate tissues. These forceps have a wide, flat thumb grasp area that is commonly serrated. The satin finish reduces...
The JLS-2 straight medium .035" point tweezer is ideal for handling medium gems. The handles are serrated for better control. This tool features a 'slide lock' to lock the tweezers...
This Adson tissue forceps is used for holding and manipulating delicate tissues. These forceps have a wide, flat thumb grasp area that is commonly serrated. The serrated tips provide more 'sure' grip. The satin...
The 954A five star 6" stress relief forming plier is designed to form a consistent stress relief in a variety of components. Similar to the 554A-US, made on a larger...
The 954 five star 6.5" multiple lead forming plier will form stress relief for multiple leads on resistors and transistors. Opening stop is adjustable for wire diameter. It features soft...
The 954B five star 5.75" is designed to form a consistent standoff in a variety of components. Similar to the 554A-US, made on a larger frame these pliers can form...
The JLB-1 straight medium .035" point tweezer is ideal for handling medium gems. The handles are serrated for better control. The black oxide finish prevents glare. This tool features a...
The JB-3 straight extra large .0945" point tweezer is ideal for handling large gems. The handles are serrated for better control. The black oxide finish prevents glare. This tool features...
The 9248SL five star Lazer Line® medium tapered/relieved optimum flush cutter has a cutting capacity of .001" - .030" soft wire. It is made of carbon tool steel with induction...
The 9247S optimum flush new and improved Lazer Line® medium SLIM LINE tapered/relieved head cutters feature NATURAL FINISH and a smaller frame with new molded grip. They are made of...
The F-6-SE two star straight tissue forceps (1 x 2 teeth) is made of stainless steel and is 4.5" long.Product Categories: Laboratory & Cleanroom Instruments - Tweezers (Forceps) - Adson...
The 9242SL five star Lazer Line® medium oval optimum flush cutter has a cutting capacity of .001" - .032" soft wire. It is made of carbon tool steel with induction...
The F-4-SE is a 45° half curved dressing forceps used for compressing or grasping tissues,  handling sterile dressings, and other purposes. The serrated tips give more gripping power, while the half curved tips allow for better visibility.Product Categories: Laboratory &...
This Adson tissue small forceps (1 X 2 teeth) is used for holding and manipulating delicate tissues. These forceps have a wide, flat thumb grasp area that is commonly serrated. The satin finish reduces...
The 9240SL five star Lazer Line® medium oval semi-flush cutter has a cutting capacity of .018" - .040" soft wire. It is made of carbon tool steel with induction hardened...
The 9238SL five star Lazer Line® small tapered/relieved optimum flush cutter has a cutting capacity of .00" - .00" soft wire. It is made of carbon tool steel with induction...
This Adson tissue medium forceps (1 X 2 teeth) is used for holding and manipulating delicate tissues. These forceps have a wide, flat thumb grasp area that is commonly serrated. The satin finish reduces...
The 90EI is a 4 3/4" Flush cutting nipper with pointed tips at both ends. For use in areas where the tool must be held perpendicular to the work surface.Product...
The 9231SL five star Lazer Line® small oval maximum flush cutter has a cutting capacity of .00" - .00" soft wire. It is made of carbon tool steel with induction...
The 909-4 five star 5" stress relief forming plier provides stress relief forming for transistors and resistor leads. Tool design is versatile in a variety of applications. Recommended for .035"...
The 9247SL optimum flush new and improved Lazer Line® medium SLIM LINE tapered/relieved head cutters feature BLACK OXIDE FINISH and a smaller frame with new molded grip. They are made...
The 9246SL five star Lazer Line® medium tapered/relieved semi-flush cutter has a cutting capacity of .008" - .036" soft wire. It is made of carbon tool steel with induction hardened...
The 9245SL five star Lazer Line® medium tapered optimum flush cutter has a cutting capacity of .001" - .032" soft wire. It is made of carbon tool steel with induction...
The 9243SL five star Lazer Line® medium tapered semi-flush cutter has a cutting capacity of .008" - .040" soft wire. It is made of carbon tool steel with induction hardened...
The 907-7 five star 6" anti-shock shear cutter/bender cuts component leads at .060" then bends the lead keeping the component in place when soldering. Recommended cutting capacity is 20 AWG...
The 907-210A five star 5.5" 90° forming tool is adjustable and designed to form 90° bend in TO247 size components. It features soft cushioned ESD safe (10¹?? ohms/sq) ergonomic grip...
The 9244SL five star Lazer Line® medium tapered maximum flush cutter has a cutting capacity of .005" - .036" soft wire. It is made of carbon tool steel with induction...
The 9241SL optimum flush new and improved Lazer Line® medium SLIM LINE oval head cutters feature BLACK OXIDE FINISH and a smaller frame with new molded grip. They are made...
The 9241S optimum flush new and improved Lazer Line® medium SLIM LINE oval head cutters feature NATURAL FINISH and a smaller frame with new molded grip. They are made of...
The 907-104A five star 5.5" transistor forming pliers is designed for TO247 package lead forming. Leads #1 and #3 will be formed at .150" from the body, lead #2 at...
The 9241E-GM five star Lazer Line® medium oval maximum flush cutter has a cutting capacity of .005" - .040" soft wire. It is made of carbon tool steel with induction...
The 907-101 Five Star 6" terminal handling plier is designed to insert or extract the hard to reach terminal plugs. The inside jaw has a cutout to prevent nicking or...
The 909-4-SE three star 5" stress relief forming plier provides stress relief forming for transistors and resistor leads. Tool design is versatile in a variety of applications. Recommended for .035"...
The 900-3RB five star 6" lock-in lead forming plier will form an "S" bend on a component lead, enabling the component to stay in place when soldering. These pliers are...
The 909-4B five star 6.25" stress relief forming plier may be used for many types of components. The smaller dimensions keep components close to the PC board. Recommended for .030"...
The 900-100A five star 6.5" roll pin extraction plier is designed to remove the card key roll pin, thus reducing production time. The 0.086" pin is replaceable. It features soft...
The 907-89 five star 5.75" dog leg lead forming plier/cutter designed to increase or decrease the center dimension on radial lead components. The added shear cutter saves component prep time....
The 907-88C five star 6" stress relief forming plier/cutter - the smaller design of this tool will "Stand-Off" the component closer to the PC board. The added shear cutter saves...
The 900-10 five star 5.5" transistor forming pliers/cutter will cut and form 3 or 5 leads on a TO-220 style component. Leads will be formed to the bottom of component...
The 900-100 five star 6.5" roll pin insertion plier is designed to insert the card key roll pin, thus reducing production time. The 0.046" pin is replaceable. It features soft...
The 907-88 five star 6" stress relief forming plier/cutter is designed to form a stand off and cut lead to length on most popular radial lead components. Recommended for .030"...
The 907-4 five star 6" thin jaw anti-shock shear cutter. The thinner jaw gives greater accessibility into high-density areas. Very useful for cutting connector pins in confined areas. Tip width...
The 7-SA-AM four star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of anti-magnetic Neverust® stainless steel and is coated with...
The 907-13A five star 5.5" long .500" flatpack forming plier/cutter is a heavy-duty tool that will form a "Gull Wing" and cut multiple leads to length on various types of...
The 762A-RTX replacement tips for 762A-RT contains 2 tips and 4 screws. It is ESD Safe (10? ohms/sq). Peek is a High Temperature thermoplastic with excellent chemical resistance. It is...
The 907-104 five star 5.5" transistor forming pliers is used in forming 3 leads on a TO-220 style transistor. The two outside leads will be bent .150", while the center...
The 900-TXC five star 5.5" shear cutting and forming plier will form one lead in and one lead out at the same time on most radial type components. The added...
The 900-88B five star 5.75" stress relief forming plier/cutter designed to form stress relief and cut lead to specific dimension in one easy step. Recommended for .020" diameter or smaller...
The 907 five star 6" anti-shock shear cutter/swager cuts components leads to .030" and swages the end of the lead to prevent it from falling out of the P.C. board....
The 759D-RTW three star 40° curved Acetal soft replaceable tip tweezer is 5" long with .060" wide tips. Product Categories: Tweezers (Forceps) - Replaceable Tip Tweezers - AcetalApplication: Curved tips...
The 759-RTN three star curved reverse action soft replaceable tip tweezer is 5" long with .012" wide tips. Carbofib® is a PTFE based material with 30% carbon fibers added. The...
The 744 five star medium chain nose pliers has an overall length is 5". It is made of carbon steel with flame hardened tips that will not bend and dual...
The 900-3RT five star 5" lock-in lead forming pliers will form an "S" bend on a component lead, enabling the component to stay in place when soldering. These pliers are...
The 749A-CE two star 5" long curved with ceramic tips. The ceramic tips are ideal for soldering applications where heat is involved. This tool includes ergonomic grips.Product Categories: Tweezers (Forceps)Country...
The 900-247 five star 6.5" 90° forming tool is for forming TO-247 packages. The leads are formed to .200" from the body. It features soft cushioned ESD safe (10¹?? ohms/sq)...
The 743 five star medium round nose plier has an overall length is 5". It is made of carbon steel with flame hardened tips that will not bend and dual...
The 900-11 five star 6.5" long individual lead forming plier is used to form an individual lead of a TO-220 or TO-247 type transistor with a .200" offset at .075"...
The 900-100X is a tool frame for the 900-100 or 900-100A head. The frame comes with 4-40 mounting holes.Product Categories: PliersApplication: Replacement blank for 900-100 and 900-100ABody Width x Body...
The 67I is a 4 3/4" Flush cutting nipper with pointed tips at both ends. For use in areas where the tool must be held perpendicular to the work surface.Product...
The 7-SA-SE-TC15 one star 45? curved tapered very fine precision PTFE coated point tweezer allows maximum visibility under magnified applications. It is made of anti-magnetic stainless steel and features 1.5...
The 5A-SA-AM four star 10° offset angle tapered ultra-fine pointed tweezer is primarily used for microscopy. The offset angle offers easy access and is designed for good visibility. The overall...
The 7-CO five star Cobaltima® 45° curved tapered very fine point tweezer with tips .0027" wide x .0012" high is ideal for microscopy. The tweezer is made of a cobalt...
The 7-CE-ESD-RTX are replacement tips for 7-CE-ESD Zirconia ceramic tipped tweezer. Includes 2 tips and screws. The tips are static dissipative (1010? ohms/sq).Product Categories: Tweezers (Forceps)Application: The curved points provide...
The 7-CE-ESD five star black replaceable ceramic tip tweezer has a fine 43° curved fine point (.025") . Zirconia ceramic has a working temperature of over 2000° F and is...
The 554TX-US five star 5.5" stress relief forming plier will form stress relief in most radial lead components. It is designed to form one lead in and one lead out...
The 769D-RTX replacement tips for 769D-RT contains 2 tips and 4 screws. Carbofib® is a PTFE based conductive (10² ohms/sq) material with 30% carbon fibers added. Working temp is 249°...
The 554J-US five star 6" long forming tool forms a "J" hook in leads up to a .031" diameter with an inside diameter of .060" and an outside diameter of...
The 759D-RTX replacement tips for 759D-RT contains 2 tips and 4 screws. Carbofib® is a PTFE based conductive (10² ohms/sq) material with 30% carbon fibers added. Working temp is 249°...
The 554B-US five star 5.5" stress relief forming plier is designed to form a consistent relief in a variety of components. It's recommended for .020" or smaller wire. It features...
The 554A-US five star 5" stress relief forming plier is designed to form stress relief for transistor and resistor leads. The tool design will make consistent stand off in a...
The 554-3RT-US five star 5.5" lock-in lead forming plier will form an "S" bend on a component lead, enabling the component to stay in place when soldering. It's recommended for...
The 7261E four star extra large oval maximum flush cutter has a cutting capacity of .005" to .08" soft wire. It is made of carbon steel. The gri The dual...
The 7260E four star extra large oval semi flush cutter has a cutting capacity of .005" to .08" soft wire. It is made of carbon steel. The dual leaf springs...
The 531B-US five star soft tip brass jaw plier is used for straightening leads. The overall length is 5.75". It features a molded antimicrobial static dissipative (10? ohms/sq) ergonomic grips...
The 5-SA-AM four star straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The style 5 has the finest points available. The overall length is 4.25". It is made...
The 554-US five star 5.75" multiple lead forming plier will offer stress relief for multiple leads on resistors and transistors. Opening stop is adjustable for wire diameter. It features a...
The 530E-1-US five star 5" shear cutter and bending plier is designed to cut leads to .060" from the PC board, then bend the lead to 30 degrees keeping components...
The 554TB-US five star 5.5" stress relief forming plier with the form area running the length of the jaws form stress relief with a .118" diameter. It is designed to...
The 554N-US five star 5.5" long multiple lead forming plier is ideal for stress relief forming for multiple lead components. The "Off Set" design makes this tool versatile for many...
The 508C-US five star metal jaw straightening plier is designed to fit between rows of connector pins. The overall length is 5.25" while the jaws are .825" wide. It features...
The 554F-US five star 5.5" stress relief forming plier is our smallest forming plier used to form a stand off on component leads of .020" diameter or smaller. It features...
The 554EF-US five star 4.75" lead forming plier designed to form stress relief while bending lead to 90° angle and maintain a consistent lead spread. It is for use on...
The 554BJ-US five star 4.75" stress relief forming plier is designed to form "Stand-Off" on 3 or 5 leads of TO-220 transistor. The angle of the head allows for longer...
The 554A-SE three star 5" stress relief forming plier is designed to form stress relief for transistor and resistor leads. The tool design will make consistent stand off in a...
The 554AJ-US five star 4.75" stress relief forming plier designed to form "Stand-off" on 3 or 5 leads of TO-220 transistors. The angle of the head allows for longer leads...
The 505F-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .3" and length is 1.257". It features a molded antimicrobial static dissipative (10?...
The 505J-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .96" and length is .25". It features a molded antimicrobial static dissipative (10?...
The 554AD-US five star 5" soft acetal tip stress relief forming plier is designed to form stress relief for transistor and resistor leads. The tool design will make consistent stand...
The 533-US five star soft tip round-flat forming plier has one round metal jaw and one flat PTFE jaw. It is excellent for forming leads and wire when scratching and...
The 554-3RB-US five star 5.25" lock-in lead forming plier will form an "S" bend on a component lead, enabling the component to stay in place when soldering. It's recommended for...
The 531-US five star soft tip nylon jaw plier is useful in straightening leads and wires when metal-to-metal contact is not desired. The overall length is 5.75". The nylon jaws...
The 532-US five star soft tip acetal thin jaw plier has tapered jaws with a small tip and is useful in areas where space is limited. The overall length is...
The 530FE-US five star 5" shear cutter/bender is designed to cut at a predetermined uniform lead length and bend the lead at the same time. This enables components to stay...
The 505A-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .6" and length is 1.26". It features a molded antimicrobial static dissipative (10?...
The 531A-US five star soft tip acetal jaw plier is ESD safe and temperature resistant up to 175 degrees C. The overall length is 5.75". It features a molded antimicrobial...
The 502-US five star 5.5" high precision stripping plier is ideal for stripping PTFE coated wires. To order, specify the wire gauge size by indicating the gauge at the end...
The 530DE-US five star 5" shear cutter and swager is designed to cut leads to .040" from PC board. It bends and swages leads, helping components to stay in place...
The 502-US-30 five star 5.5" high precision stripping plier is ideal for stripping 30 AWG PTFE coated wires. It features a molded antimicrobial static dissipative (10? ohms/sq) ergonomic grips with...
The 502-US-26 five star 5.5" high precision stripping plier is ideal for stripping 26 AWG PTFE coated wires. It features a molded antimicrobial static dissipative (10? ohms/sq) ergonomic grips with...
The 508D-US five star soft tip acetal wide jaw plier eliminates scratching and marring of delicate leads. The overall length is 5.5" and the jaws are 3/4" wide and static...
The 508-US five star brass jaw straightening plier uniquely straightens multiple leads in one easy operation. The overall length is 5.5" while the jaws are .825" wide. It features a...
The 507-US five star 5.5" DIP/IC extraction plier allows positive gripping power to those difficult to extract IC's. It features a molded antimicrobial static dissipative (10? ohms/sq) ergonomic grips with...
The 505K-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .3" and length is 1.398". It features a molded antimicrobial static dissipative (10?...
The 500-88-US three star 5" forming plier with shear cutter designed to form a consistent stand off and cut the lead to length on most popular radial lead components. It...
The 505-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .4" and length is 1.063". It features a molded antimicrobial static dissipative (10?...
The 505G-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .6" and length is 1.66". It features a molded antimicrobial static dissipative (10?...
The 505H-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .6" and length is 3.20". It features a molded antimicrobial static dissipative (10?...
The 505E-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .3" and length is 1.26". It features a molded antimicrobial static dissipative (10?...
The 505D-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .3" and length is .358". It features a molded antimicrobial static dissipative (10?...
The 505C-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .3" and length is .788". It features a molded antimicrobial static dissipative (10?...
The 505B-US five star plier has been designed to handle DIP/IC package. Height is .18", width is .4" and length is 2.08". It features a molded antimicrobial static dissipative (10?...
The 500-108-US five star 5" shear cutting and bending plier is designed to bend leads to 45 degrees, then cut the lead to .060" keeping component in place when soldering....
This plier has been designed to handle DIP/IC package. Height is .18", width is .4" and length is 1.398". It features a molded antimicrobial static dissipative (10? ohms/sq) ergonomic grips...
The 505-20-US-ST five star 6" soft tip insertion/extraction tool has soft acetal inserts eliminating scratching and nicking of delicate IC leads. The 'dash number' references the total amount of pins...
The 502-US-24 five star 5.5" high precision stripping plier is ideal for stripping 24 AWG PTFE coated wires. It features a molded antimicrobial static dissipative (10? ohms/sq) ergonomic grips with...
The 500-101A-US five star 5.5" small convex/concave forming plier is designed for forming a "J Hook" on wires and leads. The jaw tapers from front to back for forming various...
The 500-95B-US five star 5.5" long dog leg lead forming plier is designed to form a "Dog Leg" bend in the lead wire. This tool can be used to increase...
The 502-US-22 five star 5.5" high precision stripping plier is ideal for stripping 22 AWG PTFE coated wires. It features a molded antimicrobial static dissipative (10? ohms/sq) ergonomic grips with...
The 478 three star double ended scriber features a straight point and a curved hook point. The curved point has not been heat treated to prevent scratching if used as...
The 477 three star double ended scriber features one 90° right angle point and one straight point, both heat treated and hardened. The points are mounted in a knurled, finger-grip...
The 500-89-US five star 5.5" dog leg lead forming plier/cutter is designed to increase or decrease the center dimension on radial lead components. The added shear cutter saves component prep...
The 500-88-US five star 5" forming plier with shear cutter designed to form a consistent stand off and cut the lead to length on most popular radial lead components. It...
The 44I is a 5.5" Narrow Chain Nose Plier. Ideal for forming, bending and precision assembly work. Smooth Jaw to prevent marring.Product Categories: Pliers - Standard Pliers - Small NoseApplication:...
The 500-89B-US five star 5.5" dog leg lead forming plier/cutter is designed to increase or decrease the center dimension on radial lead components. The added shear cutter saves component prep...
The 475B three star diamond tip scribe with aluminum handles and 20 mil fine angled tip. The overall length is 4.5".Product Categories: Small Hand Tools - Probes,Scribes,Dotting Pens - Scribe...
The 500-210-US five star 5.5" multiple lead forming plier is designed to bend the leads on LEDs and other multiple lead components. Leads are formed to 90 degrees and .100"...
The 500-210C-US five star 5.5" 90° lead forming tool with the bend length supplied by customer will form transistors. It features a molded antimicrobial static dissipative (10? ohms/sq) ergonomic grips...
The 500-15-US five star 5.5" long multiple lead transistor forming plier forms the 3 leads of a TO-220 package with a staggered configuration. Leads #1 and #3 will be formed...
The 500-210A-US five star 4.75" adjustable multiple lead forming plier is designed to form transistor leads with .100" center spacing. Leads are formed at 90° for through-hole mounting. The distance...
The 500-13B-US five star 5.25" long .250" flatpack forming plier/cutter will form a "Gull Wing" and cut multiple leads to length on various types of QFP and SOIC packages. It...
The 500-12-US five star 5.5" multiple lead transistor forming plier is used to form an "Off Set" in the 2nd and 4th lead on TO-220-5 (5 leads) transistors. This "Off...
The 500-11-US five star 5.5" off-set lead forming plier is used to form a single lead on TO-220 style transistor. The lead can be formed .100" up or down to...
The 500-13A-US five star 5" long .375" flat pack forming plier/cutter will form a "Gull Wing" and cut multiple leads to length on various types of flat packs. It is...
The 382 two star self opening miniature straight tip chain nose pliers with small fine tips are used for those very delicate assembly jobs are made of stainless steel. The...
The 3C-SA-AM four star straight very fine precision pointed tweezer is designed for work under magnification. The overall length is 4.25". It's made of anti-magnetic Neverust® stainless steel and is...
The 3C-SA-R four star straight very fine precision pointed tweezer is designed for work under magnification. The overall length is 4.75" and its made of anti-magnetic Neverust® stainless steel. It...
The 500-104B-US five star 5" transistor forming plier is an elaborate design for forming 5 leads on a TO-220 component in one easy operation. The tool will ensure uniformity of...
The 500-105A-US five star 5" forming plier provides stress relief for dual axial lead components. It is designed for forming all leads of a component prior to surface mounting. It...
The 500-104-US five star 5" transistor forming plier is used in forming 3 leads on a TO-220 style transistor. The two outside leads will be bent .200", while the center...
The 345 two star stainless steel 8" long spatula with wooden handle can be used for mixing and potting. The blade length is 4.75" long and .63" wide.Product Categories: Small...
The 500-103B-US five star 5.5" transistor forming plier is designed to form TO-220 style transistors with 3 or 5 leads. Component leads are formed .600" from the body of the...
The 500-103-US five star 5.5" transistor forming plier is designed to form TO-220 style transistors with 3 or 5 leads. Component leads are formed .200" from the body of the...
The 500-101-US five star 5.25" small convex/concave forming plier is excellent for forming small wires and leads. The jaw tapers from front to back for forming various lead diameters.It features...
The 320-DP is a Deluxe Dotting Pen Set- Stainless steel, double-sided handle, with 10 piece attachments including 1 tapered tip, 1 spear and 8 different diameter balls.Product Categories: Small Hand...
The 43I is a 5.5" Round Nose Plier. Excellent for forming or coiling fine wires. Precision lap joint allows perfect jaw alignment.Product Categories: Pliers - Standard Pliers - Small NoseApplication:...
The 42 three star three prong spring loaded pencil tricep can handle parts up to .4" in diameter. It is very useful for picking up very fine or minute components....
The 2A-CE-ESD five star black replaceable ceramic flat tipped tweezer has straight paddle tip points .080" wide. Zirconia ceramic has a working temperature of over 2000°F and is clean room...
The 2A-SA-AM four star straight tapered flat pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75". It is made of anti-magnetic Neverust® stainless steel...
The 3-SA-AM three star straight very fine precision pointed tweezer is designed for work under magnification. It is coated with additives that have been proven extremely effective in killing off...
The 299B-P three star general purpose Scissors Product Categories: ScissorsApplication: Body Width x Body Height: x n/aTip Angle: OAL: 5" (125mm)Max per Carton: 12Country of Origin: Pakistan
The 2914 two star large 45° bent nose plier has an overall length is 6.5". It is made of stainless steel and features dual leaf springs for smooth action. The...
The 358 extremely precise large relieved blade tempered stainless steel (AISI 420) scissors are ideal for delicate applications. Their sharp tips are designed for a wide variety of applications, while...
The 381 two star self opening miniature 18° curved tip chain nose plier tips are excellent when working in very difficult and confined areas. The overall length is 3" and...
The 2904 two star large 90° bent nose plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action. The...
The 2905 two star large need nose plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 334 two star 11 piece full set precision double-ended angled and curved stainless steel probes are made of hardened stainless steel. The overall length is 5.5".Product Categories: Small Hand...
The 2-CE five star replaceable ceramic tapered tipped tweezer has straight fine points .020" wide. Zirconia ceramic has a working temperature of over 2000 degrees F and is clean room...
The 2847D two star medium needle nose serrated jaw plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action....
The 2847 two star medium needle nose plier has an overall length is 5.5". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2847-CR two star medium needle nose plier has an overall length is 5.5" and is cleanroom safe. It is made of stainless steel and features dual leaf springs for...
The 2A-SA-PI-TC15 two star straight tapered flat pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75" and it is made of anti-magnetic stainless steel....
The 2844DSL two star medium chain nose plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2844L two star medium chain nose plier has an overall length is 6". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2A-CE five star white replaceable ceramic flat tipped tweezer has straight paddle tip points .080" wide. Zirconia ceramic has a working temperature of over 2000°F and is clean room...
The 2844 two star medium chain nose plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2844D-CR two star medium chain nose serrated jaw plier has an overall length is 5.75" and is cleanroom safe. It is made of stainless steel and features dual leaf...
The 2949 two star large chain nose plier has an overall length is 6.25". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2914D two star large 45° bent nose plier has an overall length is 6.5". It is made of stainless steel and features dual leaf springs for smooth action. The...
The 2910D two star large need nose plier has an overall length is 6.5". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2843-CR two star medium round nose plier has an overall length is 5.75" and is cleanroom safe. It is made of stainless steel and features dual leaf springs for...
The 2910 two star large need nose plier has an overall length is 6.5". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2905D two star large need nose plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2843 two star medium round nose plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2847SL two star medium needle nose plier has an overall length is 5.5". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2847LD two star medium needle nose plier has an overall length is 6". It is made of stainless steel and features dual leaf springs for smooth action and serrated...
The 2833 one star flat/round soft nose plier features a stainless steel body and nylon replaceable jaws. It is ideal for forming component leads. The grips are ergonomically molded.Product Categories:...
The 2847D-CR two star medium needle nose serrated jaw plier has an overall length is 5.75" and is cleanroom safe. It is made of stainless steel and features dual leaf...
The 2829LD two star medium 60° bent nose plier has an overall length is 6". It is made of stainless steel and feature dual leaf springs for smooth action and...
The 2844SL two star medium chain nose plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2829 two star medium 60° bent nose plier has an overall length is 5.75". It is made of stainless steel and feature dual leaf springs for smooth action. The...
The 2844LD two star medium chain nose plier has an overall length is 6". It is made of stainless steel and features dual leaf springs for smooth action and serrated...
The 2844-CR two star medium chain nose plier has an overall length is 5.75" and is cleanroom safe. It is made of stainless steel and features dual leaf springs for...
The 2843SL two star medium round nose plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2842D-CR two star medium flat nose serrated jaw plier has an overall length is 5.75" and is cleanroom safe. It is made of stainless steel and features dual leaf...
The 2842L two star medium flat nose plier has an overall length is 6". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2644S two star small chain nose plier has an overall length of 6". It is made of stainless steel and features dual leaf springs for smooth action. The ergonomic...
The 2643S two star small round nose plier has an overall length of 6". It is made of stainless steel and features dual leaf springs for smooth action. The ergonomic...
The 2644D two star small chain nose serrated tip plier has an overall length of 4.75". It is made of stainless steel and features dual leaf springs for smooth action....
The 2842D two star medium flat nose serrated jaw plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action....
The 2842-CR two star medium flat nose plier has an overall length is 5.75" and is cleanroom safe. It is made of stainless steel and features dual leaf springs for...
The 2829L two star medium 60° bent nose plier has an overall length is 6". It is made of stainless steel and feature dual leaf springs for smooth action. The...
The 2643 two star small round nose plier has an overall length of 4.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2829D two star medium 60° bent nose plier has an overall length is 5.75". It is made of stainless steel and feature dual leaf springs for smooth action. The...
The 2629 two star small 60° bent nose plier has an overall length of 4.75". It is made of stainless steel and features dual leaf springs for smooth action. The...
The 2829-CR two star medium 60° bent nose plier has an overall length is 5.75" and is cleanroom safe. It is made of stainless steel and feature dual leaf springs...
The 2818-CR two star medium flat nose pliers has an overall length is 5.75" and is cleanroom safe. It is made of stainless steel and feature dual leaf springs for...
The 274 Dissection and Dressing Scissors featuring pointed tipped blades. The 270 scissors has 60° blades for excellent visibility. Made of surgical stainless steel.Product Categories: ScissorsApplication: Dissection and DressingBody Width...
The 2818 two star medium flat nose pliers has an overall length is 5.75". It is made of stainless steel and feature dual leaf springs for smooth action. The grips...
The 272 is a dressing scissors featuring one blunt tipped blade and one pointed blade. This tool is made of surgical stainless steel and is 4.5" long with cutting blades...
The 2647SD two star small needle nose plier has an overall length of 6". It is made of stainless steel and features dual leaf springs for smooth action. The ergonomic...
The 266 two star steel retractable and refillable scratch brush has a plastic handle. It can be used for fine deburring, polishing, rust removal, or cleaning and erasing in chemical...
The 2647S two star small needle nose plier has an overall length of 6". It is made of stainless steel and features dual leaf springs for smooth action. The ergonomic...
The 2647D two star small needle nose serrated tip plier has an overall length of 4.75". It is made of stainless steel and features dual leaf springs for smooth action....
The 2000RK five star vacuum system is the most revolutionary vacuum pick-up available. Designed to reduce manual handling of both chips and wafers, the Roto-Pic has a smooth positive hold-and-release...
The 179DN-RT four star straight reverse action copolymer replaceable tip tweezers are 5.125" long with .080" wide tips. The soft copolymer tips are ESD safe (10?-10? ohms/sq), temperature resistant to...
The 2642S two star small flat nose pliers have an overall length of 6". It is made of stainless steel and feature dual leaf springs for smooth action. The ergonomic...
The 2642 two star small flat nose plier has an overall length of 4.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 2629S two star small 60° bent nose plier has an overall length is 6". It is made of stainless steel and feature dual leaf springs for smooth action. The...
The 162D-RTX replacement tips for 162D-RT contains 2 tips and 4 screws. Peek is a high temperature thermoplastic with excellent chemical resistance. The surface resistivity is 10? - 10? ohms/sq....
The 162C-RT five star straight soft replaceable tip tweezer is 5" long with .080" wide tips. Peek is a high temperature thermoplastic with excellent chemical resistance. The surface resistivity is...
The 162B-RTX replacement tips for 162B-RT contains 2 tips and 4 screws. Peek is a high temperature thermoplastic with excellent chemical resistance. The surface resistivity is 10? - 10? ohms/sq....
The 162A-RTX replacement tips for 162A-RT contains 2 tips and 4 screws. Peek is a high temperature thermoplastic with excellent chemical resistance. The surface resistivity is 10? - 10? ohms/sq....
The 260AA-ESD three star ESD safe Miniature Spatulas-Aluminum Handle Oiler is 2.5" (2mm) and has a tip size of .005" (.13mm). Mini-spatulas are ideal for placing epoxies or lubricant in...
The 23B-S-SE two star straight serrated square point forceps features serrated grips for excellent control and is made of stainless steel. The serrated points offer better gripping power.Product Categories: Laboratory...
The 23D-S-SE two star straight serrated square point forceps features serrated grips for excellent control and is made of stainless steel. The serrated points offer better gripping power.Product Categories: Laboratory...
The 15A-RW-PB three star 70° angulated round tip cutting tweezer is ideal for general purpose cutting of soft wire up to 0.010". The cutting blade is much shorter than the...
The 15A-RW-ET three star 70° angulated tip cutting tweezer is ideal for general purpose cutting of soft wire up to 0.010". This tool is considered a tip cutter in that...
The 20A-S-SE one star straight serrated medium tip tweezer is 4.5" long and features a guide pin for perfect alignment every time. It has finger serrations for added control. It...
The 21-SA-SE-18 one star straight strong serrated tipped tweezer is ideal for general applications. It is made of anti-magnetic stainless steel and has serrated grips for better control. The overall...
The 15A-ST-PE-36-G 110° angled wire stripping tweezers designed to strip magnet wire coating exactly to AWG gauge without nicking. It is made of carbon steel with flame hardened edges and...
The 2000R five star vacuum system is the most revolutionary vacuum pick-up available. Designed to reduce manual handling of both chips and wafers, the Roto-Pic‚Ñ¢ has a smooth positive hold-and-release...
The 1-SA-AM four star very fine straight precision pointed tweezer is ideal for delicate applications. It is designed for bending and handling very fine wires and components. Overall length 4.5"....
The 169C-RTWX replacement tips for 169C-RTW contains 2 tips and 3 screws. Acetal has outstanding resistance to chemicals and solvents. It is excellent for cleanroom use.Product Categories: TweezersApplication: Replacement tips...
The three star 159D-RTN reverse action soft replaceable tip tweezer is 5" long with .060" wide tips. The Carbofib‚Ñ¢ tips are a polymer based material with 30% carbon fibers added...
The 169B-RTWX replacement tips for 169B-RTW contains two tips and 3 screws. Acetal has outstanding resistance to chemicals and solvents. It is excellent for cleanroom use.Product Categories: TweezersApplication: Replacement tips...
The 159D-RTWX replacement tips for 159D-RTW contain 2 tips and 4 screws. PTFE has outstanding resistance to chemicals and solvents. These Acetal tips are electrically insulative and resistant to temperatures...
The 169A-RTN four star is a reverse action soft replaceable tip 5" tweezer with .020" wide tips. The tips are made of a Carbofib‚Ñ¢ material which is a polymer based...
The 162C-RTX replacement tips for 162C-RT contains 2 tips and 4 screws. Peek is a high temperature thermoplastic with excellent chemical resistance. The surface resistivity is 10? - 10? ohms/sq....
The 159B-RTWX replacement tips for 159B-RTW contain two tips and 4 screws. Acetal has outstanding resistance to chemicals and solvents. These Acetal tips are electrically insulative and resistant to temperatures...
The 15A-ST-PE-42-Y 110° angled wire stripping tweezers designed to strip magnet wire coating exactly to AWG gauge without nicking. It is made of carbon steel with flame hardened edges and...
The 159-RTN three star reverse action soft replaceable tip tweezer is 5" long with .012" wide tips. The Carbofib‚Ñ¢ tips are a polymer based material with 30% carbon fibers added...
The 106-SA three star Paddle Tipped Tweezers hold rectangular devices very securely.Product Categories: Tweezers (Forceps)Application: Paddle Tipped Tweezers hold rectangular devices very securely.Max per Carton: 12Country of Origin: Italy
The 159-RT-RT three star soft replaceable tip tweezer is 5" long with .012" wide tips. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10²...
The 00-SA-R four star straight medium pointed tweezer is the most popular general purpose tweezer used without magnification. It is made of anti-magnetic Neverust® stainless steel. The overall length is...
The 159E-RTX replacement tips for 159E-RT contain 2 tips and 4 screws. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10² ohms/sq). Carbofib™ has...
The 00-SA-AM four star straight medium pointed tweezer is the most popular general purpose tweezer used without magnification. It is made of anti-magnetic Neverust® stainless steel and is coated with...
The 159D-RTX replacement tips for 159D-RT contain 2 tips and 4 screws. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10² ohms/sq). Carbofib™ has...
The 159D-RTW three star straight replaceable tip tweezer is 5" long with .060" wide tips. This tweezer is used primarily to prevent marring or scratching of delicate parts. Acetal has...
The 00C-SA-SE one star straight semi-fine pointed tweezer is great for general assembly. It is made of anti-magnetic stainless steel. The overall length is 4.25".Product Categories: Tweezers (Forceps) - Conventional...
The 159C-RTX replacement tips for 159C-RT contain 2 tips and 4 screws. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10² ohms/sq). Carbofib™ has...
The 159C-RTWX replacement tips for 159C-RTW contain 2 tips and 4 screws. Acetal has outstanding resistance to chemicals and solvents. These Acetal tips are electrically insulative and resistant to temperatures...
The 159C-RTW three star straight replaceable tip tweezer is 5" long with .080" wide tips. This tweezer is used primarily to prevent marring or scratching of delicate parts. Acetal has...
The 159C-RT three star soft replaceable tip tweezer is 5" long with .080" wide tips. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10²...
The 159B-RTX replacement tips for 159B-RT contain 2 tips and 4 screws. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10² ohms/sq). Carbofib™ has...
The 11DI three star medium chain nose plier has serrated jaws for firm gripping. The overall length is 4.8". It is made of stainless steel and features soft cushioned ESD...
The 10H-S-SE one star straight serrated tip forceps is 4.75" long. The handle is also serrated for better control. The tips are serrated for more gripping power. It is made...
The 10G-SA three star straight medium serrated pointed forceps is 4.38" long. The tips are serrated for better gripping power. The handle is also serrated for better control. It is...
The 109-SA three star 4.75" long S.M.D. paddle tip tweezer has small points that are set at a 45° angle for working in dense areas. It is made of anti-magnetic...
The 0-SA-AM four star straight strong precision pointed tweezer is used for general purpose assembly. It is made of anti-magnetic Neverust® stainless steel and is coated with additives that have...
The 0C three star straight miniature fine precision pointed tweezer is used for general purpose assembly. It is made of carbon steel with flame hardened tips that will not bend....
The 00C-SA three star straight semi-fine pointed tweezer is great for general assembly. It is made of anti-magnetic Neverust® stainless steel. The overall length is 4.25". The tips measure .018"...
The 38-SE two star stainless steel locking hemostat with 30° curved serrated jaws is clean room safe. The overall length is 6".Product Categories: Laboratory & Cleanroom Instruments - Hemostats/Clamps -...
The 36A-SA-SE one star 45° offset broad tipped tweezer is ideal for picking flat objects off a flat surface. The tips are .25" x .02". It features serrated handles for...
The 36-SE two star stainless steel locking hemostat with 25° curved serrated jaws is clean room safe. The overall length is 5".Product Categories: Laboratory & Cleanroom Instruments - Hemostats/Clamps -...
The 35A-SA-SE one star straight broad tipped tweezer is ideal for picking flat objects off a flat surface. The tips are .29" x .01". It features serrated handles for better...
The 35A-ESD two star straight 4.5" wide point (1/4") conductive plastic tweezer (10? ohms/sq) is temperature resistant to 212°F.Product Categories: Tweezers (Forceps) - Plastic Tweezers - Conductive PlasticApplication: Ideal for...
The 35-SE two star stainless steel locking hemostat with straight serrated jaws is clean room safe. The overall length is 5".Product Categories: Laboratory & Cleanroom Instruments - Hemostats/Clamps - StraightApplication:...
The 342 two star stainless steel 7" long double ended spatula has a round handle. Primarily used for applying or scraping potting compound or wax. It can also be used...
The 335A three star short straight tip stainless steel micro probe has 1 mil tip. The overall length is 4.75".Product Categories: Small Hand Tools - Probes, Scribes, Dotting PensBody Width...
The 333A three star fine knife tip stainless steel probe is 6" in length.Product Categories: Small Hand Tools - Probes, Scribes, Dotting PensBody Width x Body Height: n/a x n/aTip...
The 332D three star micro tip 90° angle stainless steel probe has 1 mil tip, which is the smallest available. The overall length is 6.5".Product Categories: Small Hand Tools -...
The 331D three star fine hook stainless steel probe has 10 mil tip and is designed for work under magnification. The overall length is 3".Product Categories: Small Hand Tools -...
The 331C three star fine curved stainless steel probe has 10 mil tip and is designed for work under magnification. The overall length is 3".Product Categories: Small Hand Tools -...
The 331B three star fine angle stainless steel probe has 10 mil tip and is designed for work under magnification. The overall length is 3".Product Categories: Small Hand Tools -...
The 330D three star fine hook tip stainless steel probe with standard handle has 10 mil tip. The overall length is 6".Product Categories: Small Hand Tools - Probes, Scribes, Dotting...
The 330C three star fine curved tip stainless steel probe with standard handle has 10 mil tip. The overall length is 6".Product Categories: Small Hand Tools - Probes, Scribes, Dotting...
The 330B three star fine angle tip stainless steel probe with standard handle has 10 mil tip. The overall length is 6".Product Categories: Small Hand Tools - Probes, Scribes, Dotting...
The 330A three star fine straight tip stainless steel probe with standard handle has 10 mil tip. The overall length is 6".Product Categories: Small Hand Tools - Probes, Scribes, Dotting...
The 31B-SA-SE one star reverse action straight tweezer has a special groove in the tips to hold small screws. It is very useful when needing help getting them started. It...
The 31-SA three star straight reverse action fine tipped tweezer is ideal for general purpose assembly. This style is useful when sorting and handling various components. The tip is .02"...
The 30-S-SE one star 45° angled tip reverse action angled tipped tweezer has fiber handles to protect from heat. The tool is closed at rest. It is ideal for dipping...
The 3-SA-SE one star straight very fine precision pointed tweezer is designed for work under magnification. The overall length is 4.75" and its made of anti magnetic stainless steel.Product Categories:...
The 3-SA-PI-ET two star straight very fine precision pointed tweezer is designed for work under magnification. The overall length is 5.25" and its made of anti-magnetic stainless steel. It also...
The 3-SA-PI two star straight very fine precision pointed tweezer is designed for work under magnification. The overall length is 4.75" and its made of anti-magnetic stainless steel.Product Categories: Tweezers...
The 2A-SA-TC15 three star straight tapered flat pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75" and it is made of anti-magnetic Neverust? stainless...
The 2A-SA-SE one star straight tapered flat pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75" and it is made of anti-magnetic stainless steel.Product...
The 2A-SA-PI two star straight tapered flat pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75" and it is made of anti-magnetic stainless steel.Product...
The 2A-SA three star straight tapered flat pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75" and it is made of anti-magnetic Neverust® stainless...
The 290 two star medium straight fine blade stainless steel Scissors is precision-made Scissors for general use. The overall length is 3.75" and the blade length is 1".Product Categories: Scissors...
The 29-S-SE one star straight reverse action tweezer has fiber handles to protect from heat. The tool is closed at rest. It is ideal for dipping components in a solder...
The 2899EHT two star multi-purpose small round semi-flush cutter features stainless steel construction for corrosion resistance and carbide inserts for maximum blade life. Hard wire cutting capacity is .008" -...
The 2897EHT two star multi-purpose medium round semi-flush cutter features stainless steel construction for corrosion resistance and carbide inserts for maximum blade life. Hard wire cutting capacity is .010" -...
The 289 two star short curved fine blade Scissors is stainless steel and has short thin cutting blades for delicate work and close tolerance cutting. The overall length is 3.25"...
The 288 two star short straight fine blade Scissors is stainless steel and has short thin cutting blades for delicate work and close tolerance cutting. The overall length is 3.25"...
The 2876EHT two star multi-purpose small tapered semi-flush cutter features stainless steel construction for corrosion resistance and carbide inserts for maximum blade life. Hard wire cutting capacity is .008" -...
The 2842 two star medium flat nose plier has an overall length is 5.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 270 two star 60° angled slim blade scissors is stainless steel and offer good surface clearance. The overall length is 4.5" and the blade length is 1.25".Product Categories: Scissors...
The 2647 two star small needle nose plier has an overall length of 4.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 260D three star mini-spatula (oiler) is 2.5" long and has a .025" tip. The handle is plastic and colored red. Mini-spatulas are ideal for placing epoxies or lubricant in...
The 21-SA-SE-12 one star straight strong serrated tipped tweezer is ideal for general applications. It is made of anti-magnetic stainless steel and has serrated grips for better control. The overall...
The 21-SA-SE one star straight strong serrated tipped tweezer is ideal for general applications. It is made of anti-magnetic stainless steel and has serrated grips for better control. The overall...
The 2-SA-SE one star straight tapered fine precision pointed tweezer offers better visibility and works well under low magnification. It is made of anti-magnetic stainless steel. The overall length is...
The 179D-RTX replacement tips for 179D-RT contains 2 tips and 4 screws. The soft copolymer tips are ESD safe (10?-10? ohms/sq), temperature resistant to 195° F (90°C), and silicone/chloride free....
The 179D-RT four star straight copolymer replaceable tip tweezers are 5.125" long with .080" wide tips. The soft copolymer tips are ESD safe (10?-10? ohms/sq), temperature resistant to 195° F...
The 179A-RTX replacement tips for 179A-RT contains 2 tips and 4 screws. The soft copolymer tips are ESD safe (10?-10? ohms/sq), temperature resistant to 195° F (90°C), and silicone/chloride free....
The 179A-RT four star straight copolymer replaceable tip tweezers are 5.125" long with .020" wide tips. The soft copolymer tips are ESD safe (10?-10? ohms/sq), temperature resistant to 195° F...
The 15A-GW-S three star 70° angulated tip cutting tweezer is ideal for general purpose cutting of soft wire up to 0.010". This tool is considered a tip cutter in that...
The 159A-RTX three star replacement tips are for the 159A-RT and contain 2 tips and 4 screws. The Carbofib‚Ñ¢ tips are a polymer based material with 30% carbon fibers added...
The 159A-RT three star soft replaceable tip tweezer is 5" long with .020" wide tips. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10²...
The 159-RTX replacement tips for 159-RT contain 2 tips and 4 screws. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10² ohms/sq). Carbofib™ has...
The 159-RT three star soft replaceable tip tweezer is 5" long with .012" wide tips. The Carbofib™ tips are a polymer based material with 30% carbon fibers added (conductive 10²...
The 1-SA-SE one star very fine straight precision pointed tweezer is ideal for delicate applications. It is designed for bending and handling very fine wires and components. Overall length 4.5"....
The 1-SA-PI two star very fine straight precision pointed tweezer is ideal for delicate applications. It is designed for bending and handling very fine wires and components. Overall length 4.5"....
The 0C-SA-SE one star straight miniature fine precision pointed tweezer is used for general purpose assembly. It is made of anti-magnetic stainless steel. Overall length is 3.5".Product Categories: Tweezers (Forceps)...
The 0C-SA-PI two star straight miniature fine precision pointed tweezer is used for general purpose assembly. It is made of anti-magnetic stainless steel. Overall length is 3.5".Product Categories: Tweezers (Forceps)...
The 0C-SA three star straight miniature fine precision pointed tweezer is used for general purpose assembly. It is made of anti-magnetic Neverust® stainless steel. Overall length is 3.5".Product Categories: Tweezers...
The 00-SA-SE one star straight medium pointed tweezer is the most popular general purpose tweezer used without magnification. It is made of anti-magnetic stainless steel. The overall length is 4.5".Product...
The 00-SA three star straight medium pointed tweezer is the most popular general purpose tweezer used without magnification. It is made of anti-magnetic Neverust® stainless steel. The overall length is...
The 9245E five star Lazer Line® medium tapered optimum flush cutter has a cutting capacity of .001" - .032" soft wire. It is made of carbon tool steel with induction...
The 762A-RT five star 50°curved soft replaceable tip tweezers is 5" long with .020 wide tips. Peek is a high temperature thermoplastic with excellent chemical resistance. It is inert to...
The 386 two star self-opening miniature flat nose pliers are designed to prevent nicking and marring of delicate component leads. The overall length is 3" and the jaw length is...
The 2644 two star small chain nose plier has an overall length of 4.75". It is made of stainless steel and features dual leaf springs for smooth action. The grips...
The 47I is a 5.5" Needle Nose Plier. For use on very small assembly jobs. Smooth jaws prevent nicking and marring of delicate parts.Product Categories: Pliers - Standard Pliers -...
The 162B-RT five star straight soft replaceable tip tweezer is 5" long with .040" wide tips. Peek is a high temperature thermoplastic with excellent chemical resistance. The surface resistivity is...
The 162A-RT five star straight soft replaceable tip tweezer is 5" long with .020" wide tips. Peek is a high temperature thermoplastic with excellent chemical resistance. The surface resistivity is...
The TW-700 two star tweezer Kitset® in a pouch includes 0C-SA-PI, 1-SA-PI, AA-SA-PI, 20-SA-PI, 24-SA-PI, SS-SA-PI all made in Italy. They are made of anti-magnetic stainless steel.Product Categories: Tweezers (Forceps)...
The TM-500-X are the IntelliTweeze‚Ñ¢ straight regular replacement tips for the TM-500.Product Categories: Test Equipment - RCL MeterApplication: Replacement tips for TM-500Size (Tip Width x Tip Height): .02" (.5mm) x...
The TM-500-PX are the IntelliTweeze‚Ñ¢ straight fine replacement tips for the TM-500.Product Categories: Test Equipment - RCL MeterApplication: Replacement tips for TM-500Size (Tip Width x Tip Height): .003" (.08mm) x...
The TM-500-BX are the IntelliTweeze™ 45° angled replacement tips for the TM-500.Product Categories: Test Equipment - RCL MeterApplication: Replacement tips for TM-500Size (Tip Width x Tip Height): .01" (.25mm) x...
The SS-SA-DC four star straight long slender fine precision pointed tweezer is ideal for working in confined areas. The overall length is 5.5". The tool is made of anti-magnetic Neverust®...
The SS-S-SE one star straight long slender fine precision pointed tweezer is ideal for working in confined areas. The overall length is 5.5". The tool is made of stainless steel.Product...
The SS-S three star straight long slender fine precision pointed tweezer is ideal for working in confined areas. The overall length is 5.5". The tool is made of stainless steel.Product...
The RR three star straight strong "Boley Style" tweezer is a heavy duty tweezer for general purpose use. Overall length is 5.5". It is made of carbon steel with flame...
The PVS-CB-58 three star black Buna-N static safe (10¹¹-10¹² ohms/sq) non-marring straight probe (working temp. -5° to 250° F) is .63" in diameter. It is for use on all our...
The PVS-CB-38 three star black Buna-N static safe (10¹¹-10¹² ohms/sq) non-marring straight probe (working temp. -5° to 250° F) is .38" in diameter. It is for use on all our...
The PVS-CB-34 three star black Buna-N static safe (10¹¹-10¹² ohms/sq) non-marring straight probe (working temp. -5° to 250° F) is .75" in diameter. It is for use on all our...
The PVS-CB-332 three star black Buna-N static safe (10¹¹-10¹² ohms/sq) non-marring straight probe (working temp. -5° to 250° F) is .10" in diameter. It is for use on all our...
The PVS-CB-316 three star black Buna-N static safe (10¹¹-10¹² ohms/sq) non-marring straight probe (working temp. -5° to 250° F) is .19" in diameter. It is for use on all our...
The PVS-CB-18 three star black Buna-N static safe (10¹¹-10¹² ohms/sq) non-marring straight probe (working temp. -5° to 250° F) is .13" in diameter. It is for use on all our...
The PVS-CB-14 three star black Buna-N static safe (10¹¹-10¹² ohms/sq) non-marring straight probe (working temp. -5° to 250° F) is .25" in diameter. It is for use on all our...
The PVS-CB-12 three star black Buna-N static safe (10¹¹-10¹² ohms/sq) non-marring straight probe (working temp. -5° to 250° F) is .5" in diameter. It is for use on all our...
The PVS-02 three star angulated tip with OD of 0.03" and ID of 0.02" is designed for handling very small parts. These tips are ESD safe (10¹¹-10¹² ohms/sq) white acetal...
The PVS-005 three star angulated tip with OD of 0.02" and ID of 0.005" is designed for handling very small parts. These tips are ESD safe (10-10¬π¬π ohms/sq) white acetal...
The PVB-CB-58 three star black Buna-N Static safe (10¹¹-10¹² ohms/sq) non-marring angulated 30° probe (working temp. -5° to 250° F) is .63" in diameter. It is for use on all...
The PVB-CB-38 three star black Buna-N Static safe (10¹¹-10¹² ohms/sq) non-marring angulated 30° probe (working temp. -5° to 250° F) is .38" in diameter. It is for use on all...
The PVB-CB-34 three star black Buna-N Static safe (10¹¹-10¹² ohms/sq) non-marring angulated 30° probe (working temp. -5° to 250° F) is .75" in diameter. It is for use on all...
The PVB-CB-316 three star black Buna-N Static (10¹¹-10¹² ohms/sq) safe non-marring angulated 30° probe (working temp.-5° to 250° F) is .19" in diameter. It is for use on all our...
The PVB-CB-18 three star black Buna-N Static safe (10¹¹-10¹² ohms/sq) non-marring angulated 30° probe (working temp. -5° to 250° F) is .13" in diameter. It is for use on all...
The PVB-CB-14 three star black Buna-N Static safe (10¹¹-10¹² ohms/sq) non-marring angulated 30° probe (working temp. -5° to 250° F) is .25" in diameter. It is for use on all...
The PVB-CB-12 three star black Buna-N Static safe (10¹¹-10¹² ohms/sq) non-marring angulated 30° probe (working temp. -5° to 250° F) is .5" in diameter. It is for use on all...
The PVB-04 three star 30° bent tip with OD of 0.05" and ID of 0.04" is designed for handling very small parts. These tips are ESD safe (10¹¹-10¹² ohms/sq) white...
The PVB-02 three star 30° bent tip with OD of 0.03" and ID of 0.02" is designed for handling very small parts. These tips are ESD safe (10¹¹-10¹² ohms/sq) white...
The PVB-005 three star 30° bent tip with OD of 0.02" and ID of 0.005" is designed for handling very small parts. These tips are ESD safe (10¹¹-10¹² ohms/sq) acetal...
The PV-ST three star Pen-Vac® Pro is 6" long by .5" round. The plastic static dissipative body provides ESD protection. Product Categories: Vacuum Tools - Pen-VacSize (Tip Width x Tip...
The PV-JR three star Pen-Vac® Junior comes with a hand piece and pocket clip. It is 5" long and .5" round . Product Categories: Vacuum Tools - Pen-VacSize (Tip Width...
The PV-HV-B is the Handi-Vac® replacement bulb for the PV-HV. The bulb is ESD Safe (10¹¹-10¹² ohms/sq).Product Categories: Vacuum Tools - Pen-Vac - KitsApplication: Replacement bulb for PV-HVSize (Tip Width...
The PV-2A-ESD three star Pen-Vac® Standard is an excellent tool for pick-and-place of many standard and odd size SMT components. It is 6" long by 1/2" round, with a convenient...
The PV-2-ESD three star Pen-Vac® Standard comes with a hand piece and convenient rear storage compartment and pocket clip. It is 6" long and 5" round . The kit contains...
The PV-1-ESD-CNX three star Pen-Vac® Junior comes with a hand piece and pocket clip. It is 7" long and .5" round and is ESD safe (10¹¹-10¹² ohms/sq). The kit contains...
The P-S three star straight precision fine pointed tweezer is used for general assembly and is ideal for handling fine wires or components. Overall length is 4.75". It is made...
The NH-38-SE Webster Needle Holder is used with small needles and fine suture material. The 'locking mechanism' allows the tool to apply the pressure to hold the tool infinitely. Smooth...
The NH-35-SE Webster Needle Holder is used with small needles and fine suture material. The 'locking mechanism' allows the tool to apply the pressure to hold the tool infinitely. Smooth...
The MW5-SA three star straight tapered ultra fine pointed tweezers is primarily used for microscopy. The style 5 has the finest points available. 'MW' features radius inside edges on the...
The MM-SA-SE one star 'Boley Style' 5" straight strong pointed general purpose tweezer is made of anti-magnetic stainless steel.Product Categories: Tweezers (Forceps) - Conventional Style Tweezers - Straight Medium PointsApplication:...
The MM-SA-PI two star 'Boley Style' 5" straight strong pointed general purpose tweezer is made of anti-magnetic stainless steel.Product Categories: Tweezers (Forceps) - Conventional Style Tweezers - Straight Medium PointsApplication:...
The MM three star 'Boley Style' 5" straight strong pointed general purpose tweezer is made of carbon steel and is nickel plated and will not bend. The tip are flame-hardened...
The M-H-SA three star miniature straight strong point tweezer has an overall length is 3.5". It is made of anti-magnetic Neverust® stainless steel. Product Categories: Tweezers (Forceps) - Miniature Tweezers...
The M-H-S three star miniature straight strong pointed tweezer has an overall length is 3.5". It is made of stainless steel. Product Categories: Tweezers (Forceps) - Miniature Tweezers - Strong...
The M-AC three star miniature straight medium pointed tweezer has serrated handles for better control. The tool is made of carbon tool steel with flame hardened tips that will not...
The M-4A-S three star miniature straight tapered ultra fine pointed tweezer is primarily used for microscopy. The style 4a has the finest points available. Overall length is 3.5". It is...
The M-4-S three star miniature straight tapered ultra fine pointed tweezer is primarily used for microscopy. The length, combined with the long, tapered shank and finely honed points make it...
The M-2A-SA three star miniature straight tapered flat pointed tweezer is designed for handling labels or SMD components. Overall length is 2.8". It is made of anti-magnetic Neverust® stainless steel.Product...
The M-2-SA three star miniature straight tapered fine precision pointed tweezer offers better visibility and works well under low magnification. It is made of anti-magnetic Neverust® stainless steel. The overall...
The M-00D-SA three star miniature straight medium pointed tweezer is the most popular general purpose tweezers used without magnification. It is made of anti-magnetic Neverust® stainless steel. The overall length...
The M-00D three star miniature straight medium pointed tweezer is the most popular general purpose tweezers used without magnification. It is made of carbon steel with flame hardened tips that...
The KST-5-SE one star tweezer Kitset in wooden box includes 1-SA-SE, 2-SA-SE, 3C-SA-SE, 5-SA-SE, 7-SA-SE all made of anti-magnetic stainless steel.Product Categories: Tweezers (Forceps) - KitsSize (Tip Width x Tip...
The KST-5 three star tweezer Kitset in wooden box includes 1-SA, 2-SA, 3C-SA, 5-SA, 7-SA all made in Switzerland. The tweezers are made of anti-magnetic Neverust® stainless steel.Product Categories: Tweezers...
The KST-10 three star tweezer Kitset in wooden box includes AA-SA, 00-SA, 00D-SA, 1-SA, 2-SA, 2A-SA, 3C-SA, 5-SA, 5A-SA, 7-SA all made in Switzerland. They are all made of anti-magnetic...
The GG-SA three star 'Boley Style' 5" straight tapered medium point general purpose tweezer is made of anti-magnetic Neverust® stainless steel. It has tapered tips for work in deep, recessed...
This straight tapered flat square pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75" and it is made of anti-magnetic stainless steel.Product Categories: Tweezers...
This straight tapered flat square pointed tweezer is designed for handling labels or SMD components. The overall length is 4.75" and it is made of anti-magnetic Neverust® stainless steel.Product Categories:...
This glass dropper with rubber bulb is able to be washed and reused over and over. The glass tube is removable for easier cleaning purposes.Product Categories: Laboratory & Cleanroom Instruments...
This reverse action curved 45° very fine pointed 4.5" tweezer is made of anti-magnetic stainless steel. This normally closed tweezer is great for holding parts without finger strain. Product Categories:...
This black Buna-N non-marring vacuum cup (-5° to 250°F) is .63" in diameter. It is for use on all our vacuum tools with the exception of the Roto-Pic® and the...
This black Buna-N non-marring vacuum cup (-5° to 250°F) is .38" in diameter. It is for use on all our vacuum tools with the exception of the Roto-Pic® and the...
This black Buna-N non-marring vacuum cup (-5° to 250°F) is .75" in diameter. It is for use on all our vacuum tools with the exception of the Roto-Pic® and the...
This black Buna-N non-marring vacuum cup (-5° to 250°F) is .10" in diameter. It is for use on all our vacuum tools with the exception of the Roto-Pic® and the...
This black Buna-N non-marring vacuum cup (-5° to 250°F) is .19" in diameter. It is for use on all our vacuum tools with the exception of the Roto-Pic® and the...
This black Buna-N non-marring vacuum cup (-5° to 250°F) is .13" in diameter. It is for use on all our vacuum tools with the exception of the Roto-Pic® and the...
This black Buna-N non-marring vacuum cup (-5° to 250°F) is .25" in diameter. It is for use on all our vacuum tools with the exception of the Roto-Pic® and the...
This straight strong serrated tipped 4.25" tweezer is made of AISI 303/304 stainless steel to protect from oxidation. It features finger serrations for 'non-slip' control. It's unique triangle shape makes...
This straight medium point 4.25" tweezer is made of AISI 303/304 anti-magnetic stainless steel which prevents oxidation. It features serrated handles for 'non-slip' control. Product Categories: Tweezers (Forceps) - Conventional...
This straight medium point 4.25" tweezer is made of AISI 303/304 anti-magnetic stainless steel which prevents oxidation. It features serrated handles for 'non-slip' control. Product Categories: Tweezers (Forceps) - Conventional...
This straight medium point 4.25" tweezer is made of AISI 303/304 anti-magnetic Neverust‚Ñ¢ stainless steel which completely prevents oxidation. It features serrated handles for 'non-slip' control. Product Categories: Tweezers (Forceps)...
This straight medium point 4.25" tweezer is made of carbon steel with flame hardened tips. It features serrated handles for 'non-slip' control. Product Categories: Tweezers (Forceps) - Conventional Style Tweezers...
This straight medium point 4.25" tweezer is made of carbon steel with flame hardened tips. It features serrated handles for 'non-slip' control. Product Categories: Tweezers (Forceps) - Conventional Style Tweezers...
This straight medium point 5" general purpose tweezer is made of carbon steel and has flame hardened tips for great strength. Product Categories: Tweezers (Forceps) - Conventional Style Tweezers -...
This straight medium point 5" general purpose tweezer is made of AISI 303/304 anti-magnetic stainless steel which completely prevents oxidation. It features our Ergo-Tweeze® soft cushioned ESD safe (10¹? ohms/sq)...
This straight medium point 5" general purpose tweezer is made of AISI 303/304 anti-magnetic stainless steel which prevents oxidation. Product Categories: Tweezers (Forceps) - Conventional Style Tweezers - Straight Medium...
This straight medium point 5" general purpose tweezer is made of AISI 303/304 anti-magnetic Neverust® stainless steel which completely prevents oxidation. Product Categories: Tweezers (Forceps) - Conventional Style Tweezers -...
This straight medium point 5" general purpose tweezer is made of AISI 440 stainless steel to protect from oxidation. Product Categories: Tweezers (Forceps) - Conventional Style Tweezers - Straight Medium...
This straight medium point 5" general purpose tweezer is made of AISI 440 stainless steel to protect from oxidation. Product Categories: Tweezers (Forceps) - Conventional Style Tweezers - Straight Medium...
The 9246E five star Lazer Line® medium tapered/relieved semi-flush cutter has a cutting capacity of .008" - .036" soft wire. It is made of carbon tool steel with induction hardened...
The 9244E five star Lazer Line® medium tapered maximum flush cutter has a cutting capacity of .005" - .036" soft wire. It is made of carbon tool steel with induction...
The 9243E five star Lazer Line® medium tapered semi-flush cutter has a cutting capacity of .008" - .040" soft wire. It is made of carbon tool steel with induction hardened...
The 9242E five star Lazer Line® medium oval optimum flush cutter has a cutting capacity of .001" - .032" soft wire. It is made of carbon tool steel with induction...
The 9241E-BO five star Lazer Line® medium oval maximum flush cutter has a cutting capacity of .005" - .040" soft wire. It is made of carbon tool steel with induction...
The 9240E five star Lazer Line® medium oval semi-flush cutter has a cutting capacity of .018" - .040" soft wire. It is made of carbon tool steel with induction hardened...
The 9238E five star Lazer Line® small tapered/relieved optimum flush cutter has a cutting capacity of .00" - .00" soft wire. It is made of carbon tool steel with induction...
The 9232E five star Lazer Line® small oval optimum flush cutter has a cutting capacity of .00" - .00" soft wire. It is made of carbon tool steel with induction...
The 9231E five star Lazer Line® small oval maximum flush cutter has a cutting capacity of .040" soft wire. It is made of carbon tool steel with induction hardened cutting...
The 907-59 five star 5.75" angulated head shear cutter. The shear action cut reduces shock on delicate solder connections or components. The angle of the cutting head helps to increase...
The 907-5 five star 5.25" connector pin shear cutting plier is designed with grooves on the outside of the jaws to fit between connector pins and provide a clean cut....
The 907-42A five star 5.5" multi-lead shear cutter will cut up to 8 leads in one easy motion. Anti-shock shear cut will not damage solder fillet. Standard cut length is...
The 907-1 five star 6" large anti-shock shear cutter reduces shock on delicate solder connections and sensitive components. The tip width is .170. Recommended cutting capacity is 20AWG (.032" diameter)....
The 903A-L five star 6.5" narrow is a heavy-duty shear cutter with thin tips is ideal for cutting between component leads has a tip width of .100". Recommended cutting capacity...
The 903A five star 5.5" narrow heavy duty shear cutter with thin tips is ideal cutting between component leads. The tip width is .100". Recommended cutting capacity is 18AWG (.040"...
The 903 five star 5.5" heavy duty anti-shock shear cutter is designed for cutting of connector pins and large component leads. Tip width is .18". Recommended cutting capacity is 18AWG...
The 815-SA-SE one star round tip tweezers can handle many types of round components and electronic devices. The inside hole diameter is 0.060". It is made of anti-magnetic stainless steel...
The 8-SA-PI two star straight broad body flat sharp point tweezer is 4.25" long is ideal for straightening small wires or leads. It is made of anti-magnetic stainless steel.Product Categories:...
The 7B-SA-SE one star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of anti-magnetic stainless steel. The overall length is 4.5"....
The 7B-SA-PI two star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of anti-magnetic stainless steel. The overall length is 4.5"....
The 7B-S three star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of stainless steel. The overall length is 4.5". It...
The 7B-CO five star Cobaltima® 45° curved tapered very fine serrated point tweezer with tips .0027" wide x .0012" high is ideal for microscopy. The tweezer is made of a...
The 759D-RT three star 40° curved soft replaceable tip tweezer is 5" long with .060" wide tips. Carbofib® is a PTFE based conductive (10² ohms/sq) material with 30% carbon fibers...
The 759-RT three star curved Carbofib‚Ñ¢ ESD safe soft replaceable tip tweezer has .020" wide tips. Carbofib‚Ñ¢ is a PTFE based material with 30% carbon fibers added. The working temp...
The 7375E five star Lazer Line® sub-miniature angulated/tapered maximum flush cutter with a cutting capacity of .001" - .010" soft wire. It is made of carbon tool steel with induction...
The 7371E five star Lazer Line® miniature fine tip optimum flush cutter has a cutting capacity of .001" - .010" soft wire. It is made of carbon tool steel steel...
The 7282E five star Lazer Line® medium angulated/tapered maximum flush cutter with a cutting capacity of .003" - .025" soft wire. It is made of carbon tool steel with induction...
The 7275E five star Lazer Line® miniature angulated/tapered maximum flush cutter with a cutting capacity of .003" - .025" soft wire. It is made of carbon tool steel with induction...
The 7274E five star Lazer Line® miniature tapered transverse optimum flush cutter with a cutting capacity of .001" - .020" soft wire is made of carbon tool steel with induction...
The 7273E five star Lazer Line® tapered transverse optimum flush cutter with a cutting capacity of .001" - .020" soft wire is made of carbon tool steel with induction hardened...
The 7272E five star Lazer Line® large angulated/tapered maximum flush cutter with a cutting capacity of .005" - .032" soft wire. It is made of carbon tool steel with induction...
The 7271E five star Lazer Line® small fine tip optimum flush cutter has a cutting capacity of .001" - .010" soft wire. It is made of carbon tool steel steel...
The 7270EA five star Lazer Line® small fine tip optimum flush cutter has a cutting capacity of .001" - .020" soft wire. It is made of carbon tool steel steel...
The 7270E five star Lazer Line® medium fine tip optimum flush cutter has a cutting capacity of .001" - .020" soft wire. It is made of carbon tool steel steel...
The 7248E five star Lazer Line® medium tapered/relieved optimum flush cutter has a cutting capacity of .001" - .036" soft wire. It is made of carbon tool steel with induction...
The 7245E five star Lazer Line®medium tapered optimum flush cutter has a cutting capacity of .001" - .040" soft wire. It is made of carbon tool steel with induction hardened...
The 7244E five star Lazer Line® medium tapered maximum flush cutter has a cutting capacity of .005" - .042" soft wire. It is made of carbon tool steel with induction...
The 7243E five star Lazer Line® medium tapered semi-flush flush cutter has a cutting capacity of .008" - .036" soft wire. It is made of carbon tool steel with induction...
The 7242E five star Lazer Line® medium oval optimum flush cutter has a cutting capacity of .001" - .042" soft wire. It is made of carbon tool steel with induction...
The 7241E five star Lazer Line® medium oval maximum flush cutter has a cutting capacity of .005" - .045" soft wire. It is made of carbon tool steel with induction...
The 7240E five star Lazer Line® medium oval semi-flush cutter has a cutting capacity of .008" - .050" soft wire. It is made of carbon tool steel with induction hardened...
The 7210E five star large Lazer Line® round relieved head Semi-flush cutter with a cutting capacity of .008" to .045" soft wire is made of carbon tool steel with induction...
The 7204E five star Lazer Line® large angulated/tapered maximum flush cutter with a cutting capacity of .003" - .025" soft wire. It is made of carbon tool steel with induction...
The 7182E five star Lazer Line® medium angulated/tapered maximum flush cutter with a cutting capacity of .003" - .025" soft wire. It is made of carbon tool steel with induction...
The 7175E five star Lazer Line® miniature angulated/tapered maximum flush cutter has a cutting capacity of .003" - .025" soft wire. It is made of carbon tool steel with induction...
The 7174E five star Lazer Line® miniature tapered transverse optimum flush cutter with a cutting capacity of .001" - .020" soft wire is made of carbon tool steel with induction...
The 7173E five star Lazer Line® tapered transverse optimum flush cutter with a cutting capacity of .001" - .020" soft wire is made of carbon tool steel with induction hardened...
The 7172E five star Lazer Line® large angulated/tapered maximum flush cutter has a cutting capacity of .005" - .032" soft wire. It is made of carbon tool steel with induction...
The 7171E five star Lazer Line® small fine tip optimum flush cutter has a cutting capacity of .001" - .010" soft wire. It is made of carbon tool steel steel...
The 7170EA five star Lazer Line® small fine tip optimum flush cutter has a cutting capacity of .001" - .020" soft wire. It is made of carbon tool steel steel...
The 7170E five star Lazer Line® medium fine tip optimum flush cutter has a cutting capacity of .001" - .020" soft wire. It is made of carbon tool steel steel...
The 7149E five star Lazer Line® relieved fine tip optimum flush cutter has a cutting capacity of .001" - .020" soft wire. It is made of carbon tool steel steel...
The 7148E five star Lazer Line® medium tapered/relieved optimum flush cutter has a cutting capacity of .001" - .036" soft wire. It is made of carbon tool steel with induction...
The 7147E five star Lazer Line® medium tapered/relieved maximum flush cutter has a cutting capacity of .005" - .040" soft wire. It is made of carbon tool steel with induction...
The 7146E five star Lazer Line® medium tapered/relieved semi-flush cutter has a cutting capacity of .008" - .042" soft wire. It is made of carbon tool steel with induction hardened...
The 7145E five star Lazer Line® medium tapered optimum flush cutter has a cutting capacity of .001" - .045" soft wire. It is made of carbon tool steel with induction...
The 7144E five star Lazer Line® medium tapered maximum flush cutter has a cutting capacity of .005" - .042" soft wire. It is made of carbon tool steel with induction...
The 7143E five star Lazer Line® medium tapered semi-flush flush cutter has a cutting capacity of .008" - .036" soft wire. It is made of carbon tool steel with induction...
The 7141E five star Lazer Line® medium oval maximum flush cutter has a cutting capacity of .005" - .045" soft wire. It is made of carbon tool steel with induction...
The 7140E five star Lazer Line® medium oval semi-flush cutter has a cutting capacity of .008" - .050" soft wire. It is made of carbon tool steel with induction hardened...
The 7104E five star Lazer Line® large angulated/tapered maximum flush cutter with a cutting capacity of .003" - .025" soft wire is made of carbon tool steel with induction hardened...
The 7-SN four star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of super Neverust® stainless steel. The overall length is...
The 7-SA-PI-ET two star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of anti-magnetic stainless steel. The overall length is 5"....
The 7-SA-ET three star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of anti-magnetic Neverust® stainless steel. The overall length is...
The 7-SA-EC three star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of anti-magnetic Neverust® stainless steel. The overall length is...
The 7-SA-DC four star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of anti-magnetic Neverust® stainless steel. The overall length is...
The 7-S-SE one star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of stainless steel. The overall length is 4.5".Product Categories:...
The 7-PI two star 45° curved tapered very fine precision point tweezer allows maximum visibility under magnified applications. It is made of carbon steel with flame hardened tips. The overall...
The 7-CO-ET five star Cobaltima® 45° curved tapered very fine point tweezer with tips .003" wide x .002" high is ideal for microscopy. The tweezer is made of a cobalt...
The 691P-SA-PI two star wafer tweezer for 6" wafers has 6 fingered upper paddle which limits surface contact. The overall length is 5". The tool is made of anti-magnetic stainless...
The 690T-SA-PI two star wafer tweezer for 6" wafers has a solid PTFE upper paddle which allows for less marring or scratching and has greater surface contact. The overall length...
The 690L-SA-PI two star wafer tweezer for 6" wafers has a solid upper paddle which allows greater surface contact. It is excellent for use in loading wafer trays. The overall...
The 690-SA-PI two star wafer tweezer for 6" wafers has a solid upper paddle which allows greater surface contact. The overall length is 5". The tool is made of anti-magnetic...
The 64-SA three star straight fine precision point tweezer features serrated handles for better control. It is 4.75" long and made of anti-magnetic Neverust® stainless steel.Product Categories: Tweezers (Forceps) -...
The 609 one star glass filled acetal wide point (.13") tweezer is 4.5" long. It is great for applications requiring soft non-metal tweezers that won't scratch or marr wires or...
The 60-SA three star long straight parallel point tweezer features very fine tips and great accessibility in tight places. It is 5.5" long and made of anti-magnetic Neverust® stainless steel.Product...
The 6-SA-SE one star 70° angled flat sharp precision pointed tweezer can be utilized in a variety of applications, such as manipulating very minute components or parts. The overall length...
The 6-SA-PI-ET two Star 70 degree angled flat sharp precision pointed tweezer can be utilized in a variety of applications, such as manipulating very minute components or parts. The overall...
The 6-SA-ET three star 70° angled flat sharp precision pointed tweezer can be utilized in a variety of applications, such as manipulating very minute components or parts. The overall length...
The 6-SA three star 70° angled flat sharp precision pointed tweezer can be utilized in a variety of applications, such as manipulating very minute components or parts. The overall length...
The 6-S-SE one star 70° angled flat sharp precision pointed tweezer can be utilized in a variety of applications, such as manipulating very minute components or parts. The overall length...
The 5B-SA-PI-ET two star 45° bent and tapered ultra-fine pointed tweezer is primarily used for microscopy. The bent tip offers access in very difficult areas. It is made of anti-magnetic...
The 5B-SA-PI two star 45° bent and tapered ultra-fine pointed tweezer is primarily used for microscopy. The bent tip offers access in very difficult areas. It is made of anti-magnetic...