• Fast-cure potting. Dow SYLGARD 170 Fast Cure Silicone Elastomer Black is a two-component, room-temperature and heat-curing encapsulant used as a protective coating for electrical applications such as power supplies, transformers, sensors, amplifiers, and connectors. It provides good flowability, moderate thermal conductivity, low viscosity, and flame resistance at a 1:1 mix ratio. This kit is repackaged by KitPackers.
  • General-purpose encapsulant. Dow characterizes SYLGARD 170 as a two-part, 1:1, black, general-purpose encapsulant with good flowability and flame resistance. Its fast room-temperature cure (which can also be heat-accelerated) helps speed production, and its low viscosity and flow let it fill around components for thorough protection.
  • Cured performance. The cured elastomer combines flame resistance with moderate thermal conductivity, helping protect potted assemblies against ignition risk and heat while insulating them from moisture and mechanical stress. Its black color suits applications where an opaque encapsulant is desired.
  • Handling notes. Cure begins upon mixing, progressing through a rise in viscosity and gelation to a solid elastomer; pot life and cure time depend on temperature and humidity. The mixer is not shipped with this kit. Review the product and Safety Data Sheets before use.

Recommended For

  • Protective coating for electrical assemblies
  • Power supplies and transformers
  • Sensors, amplifiers, and connectors
  • Fast-cure potting applications
  • Battery and module encapsulation

Product Details

  • Product type: Two-part fast-cure silicone encapsulant
  • Color: Black
  • Mix ratio: 1:1
  • Cure: Room temperature or heat cure (fast)
  • Key properties: Good flowability, moderate thermal conductivity, low viscosity, flame resistance
  • Packaging: Repackaged by KitPackers; 200 mL kit (mixer not included)

Primary Industries

  • Electronics and PCB manufacturing
  • Power supply and transformer manufacturing
  • Battery and module manufacturing
  • Sensor and connector manufacturing

Standards and Certifications

  • None specified by source

FAQs