Aerospace Lab Startup Checklist

Aerospace parts are built to tolerances where a fingerprint, a fiber, or a static spark can mean a failed inspection. Standing up an aerospace lab or cleanroom means sourcing gloves, wipes, solvents, ESD control, gowning, tools, and benches at once, and keeping all of it stocked once production starts.

This checklist covers the cleanroom supplies and lab equipment an aerospace lab needs from day one, from Class 10 gloves and lint-free wipes to ESD workbenches and stereo microscopes. Every product links to its Lab Pro page. Check what you need, set quantities, and add to cart, or send the whole list as one quote.

Whether you are fitting out an avionics bench, a satellite integration cleanroom, or a composites lab, start here.

Cleanroom Gloves: TechniGlove Class 10 and Class 100 Nitrile

Aerospace hardware is assembled and inspected by hand, so gloves are the first line of contamination control on every part. Use Class 10 nitrile for critical surfaces such as optics and sensors, and Class 100 for general cleanroom assembly.

Cleanroom Wipes: Texwipe Lint-Free Polyester and Blends

Aerospace parts are assembled and inspected by hand, so lint-free wipes are the second line of contamination control. Use Texwipe's lint-free polyester and blends for critical surfaces such as optics and sensors.

Cleanroom Swabs: Texwipe

Aerospace parts are assembled and inspected by hand, so lint-free swabs are the third line of contamination control. Use Texwipe's lint-free polyester and blends for critical surfaces such as optics and sensors.

Aerospace Lab Chemicals: IPA, Methanol, Nitric Acid, and Deionized Water

Aerospace parts are assembled and inspected by hand, so chemicals are the fourth line of contamination control. Use IPA, methanol, nitric acid, and deionized water for critical surfaces such as optics and sensors.

Nitric Acid 69.5%, Cleanroom LP, 2.5 L

Low-particle nitric acid for passivating stainless steel parts and other wet-process work. Strong oxidizer: store apart from solvents and handle in a fume hood.

$148.22

1

ESD and Static Control: SCS

Avionics boards, sensors, and flight electronics can be damaged by a discharge too small to feel. Ground the floor, the bench, and the operator, and ship sensitive parts in shielding bags.

Cleanroom Frocks, Coveralls, and Shoe Covers: Tians

People are the largest particle source in any cleanroom. Gown from the head down: frock or coverall, then shoe covers at the bench.

Precision Flush Cutters: Excelta

Wire harness and lead trimming need a clean, flush cut that does not deform the conductor. Choose the head shape based on how tight the access is.

Stereo Microscopes for Inspection: Scienscope

Inspect solder joints, connector pins, and surface finishes under magnification before parts move on.

ESD Workbenches and Lab Furniture

ESD workbenches and lab furniture are the fifth line of contamination control. Use ESD-safe materials and construction to prevent static charges from building up.

Get the Full Aerospace Lab Kit

Every item you checked travels with your quote request, quantities included, so our team prices the exact setup you specified. Prefer to plan offline? Download the checklist as a PDF and share it with your team.

Keeping an Aerospace Lab Stocked

Gloves, wipers, swabs, and IPA are used every shift. These programs turn this checklist into a standing supply.

Vendor Managed Inventory (VMI)

We stock, track, and replenish your critical consumables on site, so par levels are managed for you instead of counted by hand.

Scheduled Deliveries

Set a delivery cadence once and receive it on schedule, timed to your consumption.

Customer-Specific Pricing

Contract pricing on the consumables you reorder most.

PunchOut Catalogs

Order from an approved Lab Pro catalog inside your own procurement system.

FAQs