Related Products

CV-5210 Connection Validation (CV) 80 Watt Advanced Soldering and Rework System

$1,160.00

CV-5210 Connection Validation (CV) 80 Watt Advanced Soldering and Rework System

Metcal MX-5210 Solder/Rework System, Dual Simultaneous Ports, MX-H1-AV Iron/Stand, MX-5200 Series

1

$1,010.00

Share

Product Number:MX-5210

Warning:California prop 65

Categories

Soldering Desoldering Systems by Metcal Soldering Desoldering Systems

Description

Description

Key performance benefit: Dual-port soldering and rework system designed to support two users simultaneously or a single user with dual applications. Provides up to 80 W of output power per channel for soldering, desoldering, and rework tasks.
Material & construction: The system includes the MX-PS5200 power supply, the MX-H1-AV advanced handpiece, the MX-W1AV tip-saver workstand, and the MX-CP1 cartridge removal pad. Uses induction heating with Metcal SmartHeat® technology.
Risk reduction/compliance benefit: Ground-fault interrupt monitors the AC ground and alerts the operator, and shuts down the system if a ground failure is detected. Tip-to-ground potential and resistance are kept low.
Protection level: SmartHeat® fixed temperature technology automatically adjusts power levels during each soldering operation to maintain consistent operating temperatures.
Comfort & usability: Dual simultaneous output allows two handpieces to dynamically share the 80 W output power. User-programmable power-save mode allows an adjustable entry time between 10 and 120 minutes.
Safety & compliance assurance: Certified to cTUVus and CE standards.

Recommended For

Soldering applications
Desoldering tasks
Electronic rework operations
High-mass component soldering
Multilayer board soldering
Lead-free solder processes

Primary Industries

Electronics manufacturing
Electronics assembly
PCB assembly

Standards and Certifications

cTUVus
CE

Properties

Model	MX-5210
Product Type	Solder/Rework System
Series	MX-5200 Series
Output Ports	Dual simultaneous ports
Output Power	80 W max per channel (at 22 °C ambient)
Input Voltage	100–240 VAC, grounded circuit
Frequency	50/60 Hz input, 13.56 MHz output
Heating Method	Induction, SmartHeat®
Rated Power Consumption	125 W max
Tip-to-Ground Potential	< 2 mV
Tip-to-Ground Resistance	< 2 Ohm
Idle Temperature Stability	1.1 °C (2 °F) in still air
Ambient Operating Temperature	10–40 °C (50–104 °F)
Maximum Enclosure Temperature	55 °C (131 °F)
Power Supply Dimensions (W × D × H)	12.1 × 13.0 × 23.5 cm (4.8 × 5.1 × 9.3 in)
Power Supply Weight	7.4 lb (3.35 kg)
Handpiece Cable Length	122 cm (48 in), burn proof, ESD safe
Power Cord Length	183 cm

Metcal MX-5210 Solder/Rework System, Dual Simultaneous Ports, MX-H1-AV Iron/Stand, MX-5200 Series

1

$1,010.00

Share

Product Number:MX-5210

Warning:California prop 65

Categories

Soldering Desoldering Systems by Metcal Soldering Desoldering Systems

Description

Description

Key performance benefit: Dual-port soldering and rework system designed to support two users simultaneously or a single user with dual applications. Provides up to 80 W of output power per channel for soldering, desoldering, and rework tasks.
Material & construction: The system includes the MX-PS5200 power supply, the MX-H1-AV advanced handpiece, the MX-W1AV tip-saver workstand, and the MX-CP1 cartridge removal pad. Uses induction heating with Metcal SmartHeat® technology.
Risk reduction/compliance benefit: Ground-fault interrupt monitors the AC ground and alerts the operator, and shuts down the system if a ground failure is detected. Tip-to-ground potential and resistance are kept low.
Protection level: SmartHeat® fixed temperature technology automatically adjusts power levels during each soldering operation to maintain consistent operating temperatures.
Comfort & usability: Dual simultaneous output allows two handpieces to dynamically share the 80 W output power. User-programmable power-save mode allows an adjustable entry time between 10 and 120 minutes.
Safety & compliance assurance: Certified to cTUVus and CE standards.

Recommended For

Soldering applications
Desoldering tasks
Electronic rework operations
High-mass component soldering
Multilayer board soldering
Lead-free solder processes

Primary Industries

Electronics manufacturing
Electronics assembly
PCB assembly

Standards and Certifications

cTUVus
CE

Properties

Model	MX-5210
Product Type	Solder/Rework System
Series	MX-5200 Series
Output Ports	Dual simultaneous ports
Output Power	80 W max per channel (at 22 °C ambient)
Input Voltage	100–240 VAC, grounded circuit
Frequency	50/60 Hz input, 13.56 MHz output
Heating Method	Induction, SmartHeat®
Rated Power Consumption	125 W max
Tip-to-Ground Potential	< 2 mV
Tip-to-Ground Resistance	< 2 Ohm
Idle Temperature Stability	1.1 °C (2 °F) in still air
Ambient Operating Temperature	10–40 °C (50–104 °F)
Maximum Enclosure Temperature	55 °C (131 °F)
Power Supply Dimensions (W × D × H)	12.1 × 13.0 × 23.5 cm (4.8 × 5.1 × 9.3 in)
Power Supply Weight	7.4 lb (3.35 kg)
Handpiece Cable Length	122 cm (48 in), burn proof, ESD safe
Power Cord Length	183 cm