The tools used in the medical device manufacturing industry are just as crucial as the medical device itself. In fact, precision hand tools are one of the most important tools used during this production process. That’s because they are fabricated with components that are unique and designed specifically for the job at hand. Cutters are a good example of a high precision hand tool that is used during the manufacturing process of medical devices.
What is Medical Device Manufacturing?
Medical device manufacturing encompasses everything from the design of a medical device to the production of the actual device itself. This particular industry makes a significant amount of products and also plays a key role in developing new equipment and technology that make the process for diagnosing and treating illnesses more efficient. Medical device manufacturing is a component of the larger health care system.
![](https://cdn.shopify.com/s/files/1/0401/5452/9953/files/Excelta_Cutter_480x480.jpg?v=1657045602)
What is a Cutter?
A cutter is a hand tool that is designed especially for high precision cutting. Cutters are designed with a handle for gripping on one end and blades on the opposite end for cutting.
Cutters typically consist of general cutters, hard wire cutters, and side cutters for gripping, cutting, and stripping wires. There are also specialty cutters for working at an unusual angle, cutting component leads, and handling medical tubings. Stand off shear cutters are used for connector pins and component leads.
Why Do You Need Cutters in Medical Device Manufacturing
Cutters are an essential tool used in the manufacturing of medical devices. They are specifically designed to carry out the following three tasks:
- Hardwire cutters are designed for fine cutting nitinol and stainless steel material up to .010” which are commonly used wires in the production of medical devices.
- Some of the many cables and wires used in the medical device manufacturing process require high precision stripping of the outer layers or coating from the wire. Cutters are ideal for doing this in tight spaces without nicking.
- Cutters and pliers are designed specifically for the high precision task of pulling and pushing stent wires through the body of the stent.
Top Excelta Cutters and Hand Tools Used for Medical Device Manufacturing
Excelta cutters and hand tools are designed for high precision cutting and gripping. They are designed to cut a variety of wire material, fine wires under magnification, and hard-to-reach areas.
The following are some of the top Excelta hand tools used during the manufacturing process of medical devices.
2844 is a medium chain nose plier with an overall length of 5.75". This tool is used for pulling and pushing stent wires through the body of the stent.
11DI is a medium chain nose plier that has an overall length of 4.8”. This tool is used for pulling and pushing stent wires through the body of the stent.
9247E is great for cutting PTFE and silicon flash. It’s designed with a stainless steel construction and a pointed tip for hard to reach applications.
7140E is a great long handle tool for cutting stainless steel wire, however, the tool will not last long. This tool can even cut paper clips.
7241E is a great standard handle tool for cutting stainless steel wire. This is another tool that will not last long. This tool can also cut paper clips.
9231E is a miniature relieved fine tip cutter that is made for cutting PTFE and some .001 stainless steel material under magnification.
7371E is a miniature relieved fine tip cutter that is made for cutting PTFE and other small soft material under magnification.
C7245X is a hardwire cutter designed to cut nitinol and stainless steel material up to .010".
Where to purchase Excelta Cutters Used for Medical Device Manufacturing:
Lab Pro is the leader when it comes to Medical Device Manufacturing hand tools and cutters and knows that all applications are a unique process. We can work strictly from your design to produce a tool that meets your unique specifications. Our experienced and knowledgeable designers can also figure out what is needed and specifically fabricate a tool that caters to your specific application.
If you need just one tool to handle a variety of special parts or a large supply of custom-made tools to crimp, cut, place or extract parts, Lab Pro has Custom Design Services that will meet your needs. Contact info@labproinc.com or 888-4-LABPRO (888-452-2776) to learn more.